NEC NP-P525UL User Manual page 88

Using the Wall Color Correction [WALL COLOR]
This function allows for quick adaptive color correction in applications where the screen material
is not white.
NOTE:
• Selecting [WHITEBOARD] reduces brightness.
Eco mode selection and brightness adjustment [LIGHT MODE]
Adjusting the energy savings settings and the brightness of each projector in multi-screen projection.
For energy savings settings, see page
ECO MODE OFF
ECO
LONG LIFE
ADJUST
CONSTANT BRIGHTNESS OFF
ON
NOTE:
• [CONSTANT BRIGHTNESS] can be selected if [ECO MODE] is set to [OFF] and [ADJUST] is set to 50 to 70%.
• When [CONSTANT BRIGHTNESS] is set to [ON], [ECO MODE] and [ADJUST] cannot be selected.
37 "3-4 Changing Eco Mode/Checking Energy-Saving Effect".
The light module luminance (brightness) will be at the setup brightness for
[ADJUST].
By controlling the brightness and fan speed, energy can be saved and motion noise
and the power consumption can be lowered.
The mode optimizes the service life of the light module.
Brightness can be adjusted in 1% increments from 30 to 100%.
When several projectors are used for multi-screen projection, the brightness can be
adjusted individually on each projector.
The adjustment is valid when [ECO MODE] is set to [OFF].
[CONSTANT BRIGHTNESS] mode will be canceled.
Maintains the brightness that is in effect at the time [ON] is selected. Unless [OFF] is
selected, the same settings will remain in effect even when the projector is turned
off.
• To re-adjust the brightness, first turn this setting OFF before making further
adjustments.
NOTE:
• [CONSTANT BRIGHTNESS] mode is a function used to maintain the brightness at a
constant level. Color will not be fixed.
67
4. Using On-Screen Menu