NEC NP-P525UL User Manual page 48

Adjusting the tilt (Tilt foot)
Adjusting the left and right tilt.
1. Turn the left and right tilt feet to adjust.
The tilt feet lengthen and shorten when turned.
The height of the projected image is adjusted
by turning the left and right tilt feet.
If the projected image is tilted, turn one of the
tilt feet to adjust the image so that it is level.
• If the projected image is distorted, see "2-6
Correcting Keystone Distortion [KEYSTONE]"
(→ page 28).
• The tilt feet can be lengthened by a maxi-
mum of 15 mm/0.6".
• The tilt feet can be used to tilt the projector
by a maximum of 2°.
NOTE:
• Do not lengthen the tilt feet any more than 15 mm/0.6". Doing so will make the tilt feet's mount section unstable and could cause
the tilt feet to come off the projector.
• Do not use the tilt feet for any purpose other than adjusting the projector's projection angle.
Handling the tilt feet improperly, such as carrying the projector by grasping the tilt feet or hooking it onto a wall using the tilt feet,
could damage the projector.
2. Projecting an Image (Basic Operation)
Up
27
Tilt foot
Down