Http Server Function - NEC NP-P525UL User Manual

7-4. HTTP server function

Overview
The HTTP Server function provides settings and operations for:
• Setting for wired/wireless network (NETWORK SETTINGS)
To use wireless LAN connection, the optional USB Wireless LAN Unit is required. (→ page 93)
To use wired/wireless LAN connection, connect the projector to the computer with a commer-
cially available LAN cable. (→ page 91)
• Setting Alert Mail (ALERT MAIL)
When the projector is connected to a wired/wireless network, the light source usage time or
error messages will be sent via e-mail.
• Operating the projector
Power on/off, selecting input, volume control and picture adjustments are possible.
• Configure the [AMX BEACON], [Extron XTP], [HTTP SERVER], [PJLink], [ALERT MAIL], [CRESTRON]
and other settings.
How to access to the HTTP server:
• Start the Web browser on the computer via the network connected to the projector and
enter the following URL :
http://<the projector's IP address>/index.html
TIP:
• The factory setting IP address is [DHCP: ON].
NOTE:
• To use the projector in a network, consult with your network administrator about network settings.
• The display's or button's response can be slowed down or operation may not be accepted depending the settings of your network.
Should this happen, consult your network administrator. The projector may not respond if its buttons are repeatedly pressed in rapid
intervals. Should this happen, wait a moment and repeat. If you still can't get any response, turn off and back on the projector.
• If the [NETWORK SETTINGS] screen does not appear in the web browser, press the Ctrl+F5 keys to refresh your web browser (or
clear the cache).
• This device uses "JavaScript" and "Cookies" and the browser should be set to accept these functions. The setting method will vary
depending on the version of browser. Please refer to the help files and the other information provided in your software.
Preparation before Use
Connect the projector to a commercially available LAN cable before engaging in browser opera-
tions. (→ page 91)
Operation with a browser that uses a proxy server may not be possible depending on the type of
proxy server and the setting method. Although the type of proxy server will be a factor, it is possible
that items that have actually been set will not be displayed depending on the effectiveness of the
cache, and the contents set from the browser may not be reflected in operation. It is recommended
that a proxy server not be used unless it is unavoidable.
120
7. Connecting to a Network