Enabling/Disabling Ambient Light Sensor - Fujitsu Lifebook T901 User Manual

Enabling/Disabling Ambient Light Sensor

This system has an ambient light sensor (just below the scroll sensor) that automatically senses the light
conditions in which the computer is operating. If the lighting is very bright, the brightness of the LCD will
increase to make it easier to see the display. Conversely, if it is used in a darkened room, the display will
automatically dim.
N
OTE THAT WHEN YOU FIRST START YOUR SYSTEM
WILL INITIALLY NEED TO ENABLE IT USING THE FOLLOWING STEPS
The light sensor can be enabled or disabled from the Control Panel as follows:
1
Open the system Control Panel and click in the View by: field, select either large or small icons.
2
Click on the Location and Other Sensors icon.
3
To enable or disable the Light Sensor utility, check or uncheck the box in the Enabled column.
4
For more information about the light sensor, click on Light Sensor in the Sensor column to open the Sensor
Properties window.
5
From the Sensor Properties window, you can change the sensor's description, uninstall the sensor, or enable
or disable selected users.
•
To change the sensor's description, click the [Change description] button, enter the new description, and
click the [OK] button.
•
To limit who can access the sensors, click Change who can access sensors, then check or uncheck the
box adjacent to the individual you would like to grant or prohibit access.
To uninstall the sensor, click Uninstall this sensor.
,
34 - Display Panel
THE AMBIENT LIGHT SENSOR IS DISABLED
.
. Y
OU