Changing Auto Rotation Feature - Fujitsu Lifebook T901 User Manual

W
HILE HOLDING THE SYSTEM HORIZONTALLY WITH THE LATCH AT THE BOTTOM
ORIENTATION
O
PERATING IN THIS POSITION COULD RESULT IN DAMAGE TO THE
(D) 2nd Landscape Orientation: Hold the system with the display positioned horizontally with the latch
on the bottom.

Changing Auto Rotation Feature

Your Tablet PC has an Auto Rotation utility that allows you to determine how you would like the display
to act when the tablet is rotated. When Auto Rotation is enabled, the display will automatically rotate in
the same direction as the screen.
When you receive your Tablet PC, Pause and Automatic Pause are set as the defaults for the Auto Rotation
utility. When Pause is enabled, the system will not enter Auto Rotate until it is enabled. When Automatic
Pause state is enabled, the screen will not rotate automatically if it has been rotated by a means other than
Auto Rotation (such as when using the rotate button on the tablet).
If the system is in Automatic Pause state, there are several ways to resume Auto Rotate:
• Position the display and screen in the same orientation.
• When the system wakes from standby or hibernate mode.
• When the system is rebooted or a logoff/logon is performed.
When the system is in Pause state, there are several ways to enable it:
• Go to the Start menu > All Programs > Auto Rotation Utility, and click Resume.
• Right-click on the Auto Rotation Utility icon in the system tray and click Resume.
• Open the Fujitsu Menu by clicking [Fn]+[Fn] or by clicking the Fujitsu Menu icon in the system
tray, then clicking the [AutoRotation Resume] button on the second page of the Fujitsu Menu.
, ) WWAN MUST NOT
AS NOTED BELOW
32 - Display Panel
(2
ND
BE OPERATED WITH THE ANTENNA OPEN
WWAN
ANTENNA
L
ANDSCAPE
.
.