Table of Contents
Advertisement
Controls
OSD (On-Screen Display) control keys on the front of the monitor function
are as follows:
To access OSD menu, touch any of the control keys.
To change signal input, touch the SELECT key.
NOTE:
Exit OSD in order to change signal input.
EA274WMi
EA304WMi
1 Ambient Light Sensor
Human Sensor
2 Power LED
3 Power
4 INPUT/SELECT
5 MENU/EXIT
6 LEFT/RIGHT
7 UP/DOWN
8 PBP/RESET (EA274WMi)
/RESET (EA304WMi)
*
1
When Hot Key function is OFF, this function is disabled.
*
2
PBP MODE menu.
Touch the LEFT/RIGHT to select a single or a priority (adjustable) screen of split screen. When PBP MODE is OFF, a single
screen will be displayed.
Detects the level of ambient lighting and the presence of a user, allowing the monitor to
make adjustments to various settings resulting in a more comfortable viewing experience.
Do not cover this sensor.
Indicates that the power is on or off.
Turns the monitor on and off.
Enters the OSD menu. Enters OSD sub menus.
Changes the input source when not in the OSD menu.
Accesses OSD menu. Exits the OSD sub menu. Exits OSD menu.
Navigates to the left or right through the OSD menu.
You can adjust the BRIGHTNESS directly while the OSD menu is off*
Navigates up or down through the OSD menu.
You can adjust the VOLUME directly while the OSD menu is off*
Resets the OSD controls back to factory settings.
Activates the Auto Adjust function if held for 3 seconds while the OSD menu is off
(analog input only)*
1
.
Selects PBP MODE when OSD menu is off*
English-11
1
.
1
.
2
.
Advertisement
Table of Contents
