Table of Contents
Advertisement
Introduction
Projector features
The projector offers the following features
•
SmartEco™ starts your dynamic power saving
The SmartEco™ technology offers a new way of operating the projector lamp system
and saves lamp power depending on the content brightness level.
•
HDMI/MHL compatible
You can project the content from your smart devices via HDMI/MHL connection.
•
Less than 0.5W in standby condition
Less than 0.5W power consumption under standby mode.
•
One-key auto-adjustment
Pressing AUTO on the keypad or remote control to show the best picture quality
immediately.
•
Built-in 10 W x 2 speaker(s)
Built-in speaker(s) providing mixed mono audio when an audio input is connected
•
Quick Cooling, Auto Power Off, Signal Power On, Direct Power On
Quick Cooling function speeds up the cooling process when turning off the
projector. Auto Power Off function allows the projector to turn off automatically if
no input signal is detected after a set period of time. Signal Power On function turns
on your projector automatically once detecting the signal input and Direct Power
On turns your projector when the power is fed.
•
3D Function supported
Various 3D formats make the 3D function more flexible. By presenting the depth of
the images, you can wear BenQ 3D glassed to enjoy the 3D movies, videos and
sporting events in a more realistic way.
•
The apparent brightness of the projected image will vary depending on the ambient lighting conditions,
selected input signal contrast/brightness settings, and is directly proportional to projection distance.
•
The lamp brightness will decline over time and may vary within the lamp manufacturers specifications. This
is normal and expected behavior.
Introduction
7
Advertisement
Table of Contents
