Table of Contents
Advertisement
Controls and functions
Projector
1.
LAMP indicator light
Indicates the status of the lamp. Lights up
or flashes when the lamp has developed a
problem.
2.
TEMPerature warning light
Lights up red if the projector's
temperature becomes too high.
3.
POWER indicator light
Lights up or flashes when the projector is
under operation.
4.
Focus ring
Adjusts the focus of the projected image.
5.
Keystone/Arrow keys (
Down)
Manually corrects distorted images
resulting from an angled projection.
6.
SOURCE
Displays the source selection bar.
7.
Left/
Decreases the projector volume.
8.
AUTO
Automatically determines the best picture
timings for the displayed image.
10
Introduction
1
2
3
/ Up,
5
6
7
b
a
4
8
9.
POWER
Toggles the projector between standby
mode and on.
10. ECO BLANK
Used to hide the screen picture.
11. MODE/ENTER
Selects an available picture setup mode.
Activates the selected On-Screen Display
(OSD) menu item.
12.
Right/
Increases the projector volume.
When the On-Screen Display (OSD)
/
menu is activated, the #5, #7 and #12
keys are used as directional arrows to
select the desired menu items and to
make adjustments.
13. MENU/EXIT
Turns on the On-Screen Display (OSD)
menu. Goes back to previous OSD menu,
exits and saves menu settings.
9
10
11
12
5
13
Advertisement
Table of Contents
