Table of Contents
Advertisement
Function
Closed
Caption
Standby
Settings
Reset All
Settings
Current
System
Status
46
Operation
Closed Caption Enable
Activates the function by selecting On when the selected input signal
carries closed captions.
•
Captions: An on-screen display of the dialogue, narration, and
sound effects of TV programs and videos that are closed captioned
(usually marked as "CC" in TV listings).
Caption Version
Selects a preferred closed captioning mode. To view captions, select
CC1, CC2, CC3, or CC4 (CC1 displays captions in the primary
language in your area).
Audio Pass Through
The projector can play sound when it is in standby mode and the
corresponding jacks are correctly connected to devices. Press
choose the source that you wish to use. See
for how to make the connection.
Enabling this function slightly increases the standby power consumption.
Returns all settings to the factory preset values.
The following settings will still remain: Keystone, User 1, User 2,
Projector Installation, High Altitude Mode, Security Settings and
Baud Rate.
Source
Shows the current signal source.
Picture Mode
Shows the selected mode in the PICTURE menu.
Lamp Mode
Shows the current lamp mode.
Resolution
Shows the native resolution of the input signal.
3D Format
Shows the current 3D mode.
Color System
Shows input system format.
Lamp Usage Time
Displays the number of hours the lamp has been used.
Firmware Version
Shows the firmware version of your projector.
Description
"Connection" on page 19
/
to
Advertisement
Table of Contents
