Table of Contents
Advertisement
About the aspect ratio
•
In the pictures below, the black portions are inactive areas and the white portions are active areas.
•
OSD menus can be displayed on those unused black areas.
1.
Auto
projector's native resolution in its horizontal or
vertical width. This is suitable for the incoming
image which is neither in 4:3 nor 16:9 and you
want to make most use of the screen without
altering the image's aspect ratio.
2.
Real
resolution, and resized to fit within the display
area. For input signals with lower resolutions, the
projected image will display smaller than if resized
to full screen. You could adjust the zoom setting
or move the projector towards the screen to
increase the image size if necessary. You may also
need to refocus the projector after making these
adjustments.
3.
4:3: Scales an image so that it is displayed in the
center of the screen with a 4:3 aspect ratio. This
is most suitable for 4:3 images like some
computer monitors, standard definition TV and
4:3 aspect DVD movies, as it displays them
without aspect alteration.
4.
16:9: Scales an image so that it is displayed in the
center of the screen with a 16:9 aspect ratio. This
is most suitable for images which are already in a
16:9 aspect, like high definition TV, as it displays
them without aspect alteration.
5.
16:10: Scales an image so that it is displayed in
the center of the screen with a 16:10 aspect
ratio. This is most suitable for images which are
already in a 16:10 aspect, as it displays them
without aspect alteration.
30
Operation
:
Scales an image proportionally to fit the
:
The image is projected as its original
15:9 picture
4:3 picture
16:9 picture
4:3 picture
16:9 picture
16:10 picture
Advertisement
Table of Contents
