Multicast; Iptv - TP-Link TD-W8950N User Manual

150mbps wireless n adsl2+ modem router

Hide thumbs Also See for TD-W8950N:

Table of Contents

TD-W8950N

4.4.15 Multicast

Choose "Advanced Setup""Multicast", you can configure the IGMP protocol on the screen.

Click Save/Apply to save your settings.



Enable IPTV: Check this box to enable IPTV. If you enable IPTV, please make sure the

following settings are correct.



VPI (0-255): Identifies the virtual path between endpoints in an ATM network. The valid range

is from 0 to 255. Please input the value provided by your ISP.



VCI (1-65535): Identifies the virtual channel endpoints in an ATM network. The valid range is

from 1 to 65535 (1 to 31 is reserved for well-known protocols). Please input the value

provided by your ISP.

Click the Save/Apply button to save your settings.

150Mbps Wireless N ADSL2+ Modem Router User Guide

Figure 4-59

Figure 4-60

Table of Contents