Table of Contents
Advertisement
This device is not equipped with a power switch and is simply connected to the power supply adapter which is
plugged into a suitable AC power source, to power it up.
Once the device is powered it goes through the following startup sequence:
Reset switch is checked and if it is pressed then the
•
Routing matrix is initialized to Preset 0 state (defaults to source 1 connected to all destinations).
•
1.3 Front Status Panel
The MSC-XD88S has a status front panel with 3 LED indicators, described in the following table:
LED Label
Description
PS 1
Power supply 1 good indicator.
PS 2
Power supply 2 good indicator.
FAULT
Red LED for user configurable faults.
Table 2: Status Panel Indicators
This model is not equipped with a built-in button control panel, however several options are available for
controlling the device, including the web page interface, telnet, RS-232 serial and remote control panels.
1.4 Web Page Interface
All Matrix Switch Corporation router and panel devices come with a built-in web page interface.
This is the recommended interface for configuration and is also a convenient way to control the matrix routing
of the device.
Devices come factory configured with default settings, unless a pre-configuration request is made during
purchase, an example being a multi device application.
1.4.1 Accessing The Web Page Interface
The default network IP address for this device is 192.168.2.60. Refer to the table below for the default IP
addresses for other types of Matrix Switch Corporation devices.
Device Type
Video/Audio Routers
Remote Button Panels
Remote LCD Screen Panels
Table 3: Default System IP Addresses
To access the web page interface of the device:
1. Connect the Ethernet port of a computer either directly to the device using a straight through or
crossover cable to the same Ethernet network through a network switch or other LAN infrastructure.
2. Manually configure the computer's IP address to be a unique address on the same IP subnet as the
Page 8 of 60
MSC-XD88S Product Manual
© 2013-2018 Matrix Switch Corporation
Software failsafe recovery procedure
Default IP Address
192.168.2.60
192.168.2.64
192.168.2.80
is entered.
www.matrixswitch corp.com
Advertisement
Table of Contents
