Table of Contents
Advertisement
This device is not equipped with a power switch and is simply connected to the power supply adapter which is
plugged into a suitable AC power source, to power it up.
Once the device is powered it goes through the following startup sequence:
5 second startup delay to allow for
•
Routing matrix is initialized to Preset 0 state (defaults to source 1 connected to all destinations).
•
The status panel RUN/SYS LED will flash at regular intervals once the system has booted up.
•
1.3 Front Status Panel
The MSC-2HD2424S has a status front panel with 4 LED indicators, described in the following table:
LED Label
Description
PWR
Active when power is supplied to the device.
SYS
Flashes at regular intervals to indicate the system is running.
LAN
Active when the Ethernet port is physically connected.
TX/RX
Flashes on Ethernet transmit or receive activity.
Table 2: Status Panel Indicators
This model is not equipped with a built-in button control panel, however several options are available for
controlling the device, including the web page interface, telnet, RS-232 serial and remote control panels.
1.4 Web Page Interface
All Matrix Switch Corporation router and panel devices come with a built-in web page interface.
This is the recommended interface for configuration and is also a convenient way to control the matrix routing
of the device.
Devices come factory configured with default settings, unless a pre-configuration request is made during
purchase, an example being a multi device application.
1.4.1 Accessing The Web Page Interface
The default network IP address for this device is 192.168.2.60. Refer to the table below for the default IP
addresses for other types of Matrix Switch Corporation devices.
Device Type
Video/Audio Routers
Remote Button Panels
Remote LCD Screen Panels
Table 3: Default System IP Addresses
To access the web page interface of the device:
1. Connect the Ethernet port of a computer either directly to the device using a crossover cable to the same
Page 8 of 60
MSC-2HD2424S Product Manual
Power On Software
© 2013-2018 Matrix Switch Corporation
Updates.
Default IP Address
192.168.2.60
192.168.2.64
192.168.2.80
www.matrixswitch corp.com
Advertisement
Table of Contents
