Add Frame; Multi-Capture; Capture Timer; Self Capture - Asus J201 User Manual

Effect.
A list of photo effects appears.
2. Highlight an effect from the list using the
joystick and press the enter key to apply
the setting.

Add Frame

Use the Add Frame option to add frames to
pictures you capture.
To apply frames to photos:
1. While in capture mode, select Option >
Frame.
2. Highlight a frame from the list.
You can use the up and down joystick
keys to scroll through the other frames to
view them all.
3. To select a frame, press the enter key. The
selected frame is then displayed on the
capture screen.
4. To remove a frame, select Option >
Frame > No Frame.

Multi-Capture

The Multi-Capture enables multiple capture
shots, so the camera captures three or fi ve
shots with a single click of the button.
To enable the multi-capture function:
1. While in capture mode, select Option >
Multi-Capture.
2. Select a number of shots. Select
Deactivate or 4 Shots, 6 Shots or 9 Shots
54
for multi-capture shots.

Capture Timer

Use the delay timer to add a delay time
between pressing the capture button and the
picture actually being captured. This can allow
enough time to take pictures of yourself.
To set the capture timer:
1. While in capture mode, select Option >
Capture Timer.
2. Select 5 sec, 10 sec, or 15 sec, or
Deactivate to turn the function off.

Self Capture

Use the self capture option to take pictures of
yourself.
To enable the multi-capture function:
1. While in capture mode, select Option >
Self Capture.
2. Close the fl ip top, and you can see your
own image on the sub screen. Press
the capture button on the left side of
the camera to take the snapshot. When
you are done, open the fl ip top again.
The image is automatically saved to My
Album.

Restore Default

Use the Restore Default option to restore all
factory default camera settings.
To restore default settings:
1. While in capture mode, select Option >
Restore Default.
2. A message asking you to confi rm the