Canon 2207C025 User Manual page 260

The authentication method of the machine is set to <Shared Key>, but that of the wireless router is set to
"Open System."
● Change the WEP authentication method to "Shared Key" at the wireless router, and connect again. For
more information about how to change, see the instruction manuals for your networking devices or
contact your manufacturer.
Could not set the current date and time.
The communication failed due to a network error and a timeout occurred.
● Check the network environment that the machine connects with.
● Use <Current Date/Time Settings> to set the time manually, or, in [SNTP Settings], clear the [Use SNTP]
check box.
Setting the Current Date and Time(P. 20)
Configuring SNTP(P. 64)
Could not update the device time because its battery has run out. Cannot
use Google Cloud Print if the time settings are incorrect.
The machine's battery has run out and the correct time settings could not be kept.
● Set the correct time again.
Setting the Current Date and Time(P. 20)
Direct Connection terminated.
Connection with the mobile device was interrupted.
● Establish Direct Connection again.
Connecting Directly (Access Point Mode)(P. 112)
Direct Connection terminated. Check network connection.
Connection with the mobile device was interrupted.
● Establish Direct Connection again.
Connecting Directly (Access Point Mode)(P. 112)
Drum Cart. Life End Replace the drum cartridge.
The drum cartridge has reached the end of its lifetime.
● Replace the drum cartridge with a new one.
Replacing the Drum Cartridge(P. 213)
Troubleshooting
255