Char-Broil 463620809 Product Manual page 24

Lid
13
Place lid assembly onto firebox, aligning hinges. Upper Hinges fit inside lower hinges. Secure using two hinge pins and
hitch pins. Tighten upper hinge screws.
Hinge Pin
Qty. 2
Hitch Pin
Qty. 2
Heat Tent and Cooking Grate
14
Place heat tent into firebox. Align the slots on heat tent to heat tent support screws.
Place cooking grate onto firebox.
Heat Tent
Swing Away
15
Insert ends of Swing Away pivot wire into holes in sides of grill lid. Insert ends of Swing Away leg wire into holes in sides of
firebox. NOTE: Pivot and leg wires, running side-to-side, should be under wires running front-to-back. If pivot and leg wires
are on top, swing away is installed upside-down.
24
Cooking Grate
Pivot wire
Leg wire
Swing Away