Table of Contents
Advertisement
How to use the Mode Selection Button
Heating Operation
PQRCFCS0C
Defrost
Preheat
TEMP
ROOM
FAN
TEMP
SPEED
TEMP
14 Simple Wired Remote Controller
Out door
Room Temp
Total on
Central Run
1
If you want to start the heating operation, press the
On/Off button. The heating mode can be set from
Central Controller only.
2
Set the desired room temperature higher than the
current room temperature. (16~30°C)
A click of the button will increase the desired temperature by 1°C or 2°F.
TEMP
TEMP
A click of the button will decrease the desired temperature by 1°C or 2°F.
* If the desired temperature is set lower than the current
room temperature, the heating function will not begin.
3
If you want to change mode during the operation, the
operation mode will be changed by Central Controller.
4
If you press On/Off button again, the heating operation
will stop.
Advertisement
Table of Contents
