Heating Operation - LG PQRCFCS0 Owners & Installation Manual

How to use the Mode Selection Button

Heating Operation

PQRCFCS0
Defrost Preheat
ROOM FAN
TEMP SPEED
What is the three-minute delay function?
It will take a time for the product to blow warm air. The delay is just to protect the compressor.
The room will be heated with warm air after three minutes when the compressor begins operation.
I The cooling-only model will not do heating function.
12 Simple Wired Remote Controller
Out door
Room Temp
Total on
Central Run
1
If you want to start the heating operation, press the
On/Off button. The heating mode can be set from
Central Controller only.
2
Set the desired room temperature higher than the
current room temperature. (16~30°C)
A click of the button will increase the desired temperature by 1°C.
A click of the button will decrease the desired temperature by 1°C.
* If the desired temperature is set lower than the current
room temperature, the heating function will not begin.
3
If you want to change mode during the operation, the
operation mode will be changed by Central Controller.
4
If you press On/Off button again, the heating operation
will stop.