Advertisement

Quick Links

The TPS62088YWCEVM-084 facilitates the evaluation of the TPS62088YWC 3-A, step-down converter
with DCS-Control™ in a tiny 1.2-mm by 0.8-mm WCSP package with 0.3-mm pitch. The EVM outputs a
1.8-V output voltage with 1% accuracy from input voltages between 2.4V and 5.5V with a maximum
solution height of 1 mm. The TPS62088YWC is a highly efficient and tiny solution for point-of-load (POL)
converters for space-constrained applications, such as solid state drives (SSDs), wearables, and smart
phones.
...................................................................................................................
1
..........................................................................................................................
2
3
4
5
1
2
.....................................................................................................................
3
4
5
Signal Layer 2
6
7
8
9
1
Performance Specification Summary
2
TPS62088EVM-814 List of Materials
SLUUC09 - May 2019
Submit Documentation Feedback
TPS62088YWCEVM-084 Evaluation Module
...................................................................................
.................................................................................................................
............................................................................................
= 3000 mA)
................................................................................................................
................................................................................................................
................................................................................................................
.................................................................................................................
................................................................................
...................................................................................
......................................................................................
.....................................................................................
.....................................................................................
Copyright © 2019, Texas Instruments Incorporated
Contents
List of Figures
......................................................................
List of Tables
TPS62088YWCEVM-084 Evaluation Module
User's Guide
SLUUC09 - May 2019
2
3
4
4
7
4
4
5
5
5
5
6
6
7
2
7
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TPS62088YWCEVM-084 and is the answer not in the manual?

Questions and answers

Summary of Contents for Texas Instruments TPS62088YWCEVM-084

  • Page 1: Table Of Contents

    SLUUC09 – May 2019 TPS62088YWCEVM-084 Evaluation Module The TPS62088YWCEVM-084 facilitates the evaluation of the TPS62088YWC 3-A, step-down converter with DCS-Control™ in a tiny 1.2-mm by 0.8-mm WCSP package with 0.3-mm pitch. The EVM outputs a 1.8-V output voltage with 1% accuracy from input voltages between 2.4V and 5.5V with a maximum solution height of 1 mm.
  • Page 2: Introduction

    Introduction The TPS62088YWC is a synchronous, step-down converter in a 1.2- x 0.8- x 0.3-mm wafer chip-scale package (WCSP). Performance Specification Table 1 provides a summary of the TPS62088YWCEVM-084 performance specifications. Table 1. Performance Specification Summary SPECIFICATION UNIT Input voltage...
  • Page 3: Setup

    Setup www.ti.com Setup This section describes how to properly use the TPS62088YWCEVM-084. Input/Output Connector Descriptions J1, Pin 1 and 2 – VIN Positive input connection from the input supply for the EVM. J1, Pin 3 and 4 – S+/S- Input voltage sense connections. Measure the input voltage at this point.
  • Page 4: Tps62088Ywcevm-084 Test Results

    TPS62088YWCEVM-084 Test Results www.ti.com TPS62088YWCEVM-084 Test Results The TPS62088YWCEVM-084 was used to take all the data in the TPS62088 data sheet (SLVSD94). See the device data sheet for the performance of this EVM. Figure 1 shows the thermal performance of the EVM.
  • Page 5: Top Layer

    Board Layout www.ti.com Figure 3. Top Layer Figure 4. Signal Layer 1 Figure 5. Signal Layer 2 Figure 6. Bottom Layer SLUUC09 – May 2019 TPS62088YWCEVM-084 Evaluation Module Submit Documentation Feedback Copyright © 2019, Texas Instruments Incorporated...
  • Page 6: Tps62088Ywcevm-084 Overhead View

    Board Layout www.ti.com Figure 7. TPS62088YWCEVM-084 Overhead View Figure 8. TPS62088YWCEVM-084 Angled View TPS62088YWCEVM-084 Evaluation Module SLUUC09 – May 2019 Submit Documentation Feedback Copyright © 2019, Texas Instruments Incorporated...
  • Page 7: Schematic And List Of Materials

    Schematic and List of Materials www.ti.com Schematic and List of Materials This section provides the TPS62088YWCEVM-084 schematic and list of materials. Schematic Figure 9 illustrates the EVM schematic. VOUT 240nH 1.8V 3A Peak 2.4V to 5.5V 200k 100k 120pF 100uF 4.7uF...
  • Page 8 STANDARD TERMS FOR EVALUATION MODULES Delivery: TI delivers TI evaluation boards, kits, or modules, including any accompanying demonstration software, components, and/or documentation which may be provided together or separately (collectively, an “EVM” or “EVMs”) to the User (“User”) in accordance with the terms set forth herein.
  • Page 9 www.ti.com Regulatory Notices: 3.1 United States 3.1.1 Notice applicable to EVMs not FCC-Approved: FCC NOTICE: This kit is designed to allow product developers to evaluate electronic components, circuitry, or software associated with the kit to determine whether to incorporate such items in a finished product and software developers to write software applications for use with the end product.
  • Page 10 www.ti.com Concernant les EVMs avec antennes détachables Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à...
  • Page 11 www.ti.com EVM Use Restrictions and Warnings: 4.1 EVMS ARE NOT FOR USE IN FUNCTIONAL SAFETY AND/OR SAFETY CRITICAL EVALUATIONS, INCLUDING BUT NOT LIMITED TO EVALUATIONS OF LIFE SUPPORT APPLICATIONS. 4.2 User must read and apply the user guide and other available documentation provided by TI regarding the EVM prior to handling or using the EVM, including without limitation any warning or restriction notices.
  • Page 12 Notwithstanding the foregoing, any judgment may be enforced in any United States or foreign court, and TI may seek injunctive relief in any United States or foreign court. Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2019, Texas Instruments Incorporated...
  • Page 13 TI products. TI’s provision of these resources does not expand or otherwise alter TI’s applicable warranties or warranty disclaimers for TI products. Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2019, Texas Instruments Incorporated...

Table of Contents