Weather Station; Power Requirements; 12-Hour Or 24-Hour Time Format; Fahrenheit/Celsius - La Crosse Technology T83653v2 Manual

When temperature alert sounds, the corresponding alert icon (bell) will flash.

The alert beeps once every minute, until the temperature is out of alert range.

 Press any button to stop alert. The alert symbol will still show.
 Turn alert OFF: In normal mode, hold and release the ALERT button to select the alert.
With HI or LO alert selected, press the ▼ button to disarm that alert.

Weather Station

Power Requirements

 This weather station is powered by a 5 volt AC adapter adapter
 Alternatively, optional 3-AAA alkaline batteries may be used.

12-Hour or 24-Hour time format

 Time can display in 12-hour (am, pm) or 24-hour format.
 Default is 12-hour time.
 Use the Program Menu

Fahrenheit/Celsius

Use the program menu


Indoor Comfort Level Indicator

The indoor comfort display is based off the humidity read by the weather station.
The weather station will display one of five indicators:
 Too DRY (1-24%)
 DRY (25-39%)
 Comfort OK (40-70%)
 Wet (71-80%)
 Too Wet (81-97%)

Backlight

AC adapter: The backlight is on continuously when operating the weather station with the
5-volt AC adapter.
Note: When the AC adapter is NOT in use, the HI-LOW-OFF light feature is not available.
 HIGH: The backlight is defaulted to HI at setup when the AC adapter is in use.
 LOW: Press the HI-LOW-OFF button to dim the backlight.
 OFF: Press the HI-LOW-OFF button again to turn the backlight off.
 Press the HI-LOW-OFF button to return to full strength.
Note: When the backlight is off, press any button to activate the backlight for 10 seconds.
Battery power: When operating on battery power only, press and release the any button
and the backlight will show for 10 seconds.

Dashes, HH.H, LL.L or stuck Indoor Temperature/Humidity

Explanation: These symbols are error messages indication the indoor sensor is outside of
its readable range. For indoor readings, this is generally a power related issue.
 Check that the AC adapter cord is inserted into a working outlet.
Batteries may be overpowered or underpowered. Remove batteries from the weather

station.
 Press any button 20 times. Leave the weather station unpowered for 1-2 hours.
La Crosse Technology, Ltd.
to switch time formats.
to switch between Fahrenheit and Celsius.
www.lacrossetechnology.com/support Page 9