Table of Contents
Advertisement
transmitter on a North-facing wall or in any well shaded area. The maximum transmitting range is
330 feet (100 meters). Obstacles such as walls, concrete, and large metal objects can reduce the
range.
Place both units in their desired location, and wait approximately 10 minutes before permanently
mounting to ensure that there is proper reception. The outdoor temperature transmitter is not
waterproof and should not be placed anywhere it will become submerged in water or be directly in
the rain.
POSITIONING THE ATOMIC CLOCK:
There are two possible ways to mount the atomic clock:
•
use of the foldout table stands, or
•
wall mounting
FOLDOUT TABLE STAND
The foldout table stand legs are located on the backside, at the lower corners, just
below the battery cover. The hinges are towards the edges of the atomic clock, and
the ends (with no hinge) need to be folded out towards the edge. Once the foldout
table stands are extended, place the atomic clock in an appropriate location.
WALL MOUNTING
1) Using a straight edge, horizontally space at 2-3/4 of an inch (70 mm) three
2) Install three mounting screws (not included) into a wall —leaving
3) Place the atomic clock onto the screws, using the hanging holes on the
Note:
Always ensure that the atomic clock locks onto the screws before releasing.
screw positions on a wall.
approximately 3/16 of an inch (5mm) extended from the wall.
backside. Gently pull the atomic clock down to lock the screws into place.
14
Advertisement
Table of Contents
