Table of Contents
Advertisement
Trouble shooting
en
Cleaning the metal mesh grease filters
These instructions apply to several appliance variants. It
is possible that individual features are described which
do not apply to your appliance.
:
Warning
Risk of fire!
Fatty deposits in the grease filter may catch fire.
Regularly clean the grease filter. Never operate the
appliance without a grease filter.
Notes
Do not use aggressive, acidic or alkaline cleaning
■
products.
We recommend cleaning the grease filters every 2
■
months.
When cleaning the metal grease filters, also clean
■
the metal grease filter holder in the appliance using
a damp cloth.
The metal grease filters can be cleaned in the
■
dishwasher or by hand.
By hand:
You can use a special degreaser to remove
Note:
stubborn dirt. This can be ordered from the online shop.
Soak the metal grease filters in hot soapy water.
■
Clean the filters with a brush and then rinse them
■
thoroughly.
Leave the metal grease filters to drain on an
■
absorbent material.
In the dishwasher:
Slight discolouration may occur if the metal
Note:
grease filters are cleaned in the dishwasher. This
discolouration has no effect on the performance of the
metal grease filters.
Use normal domestic dishwashing detergents.
■
Do not clean heavily soiled metal grease filters
■
together with cookware.
Place the metal grease filters in the dishwasher,
■
leaving plenty of space around them. Do not trap the
metal grease filters.
Select a temperature of no more than 50 °C.
■
Installing the metal mesh grease filter
:
Warning
Risk of injury!
Components inside the appliance may have sharp
edges. Wear protective gloves.
Clean all accessible parts of the housing.
Note:
Insert the metal grease filter and lock it in place.
1.
When you do this, take hold of the metal grease filter
from underneath with your other hand.
Make sure that the metal grease filter is
Note:
positioned correctly.
If the metal grease filter has not been inserted
2.
correctly, open the lock and reinsert the metal
grease filter correctly.
10
3Trouble shooting
Malfunctions often have simple explanations. Please
T r o u b l e s h o o t i n g
read the following notes before calling the after-sales
service.
:
Warning
Risk of electric shock!
Incorrect repairs are dangerous. Repairs may only be
carried out and damaged power cables replaced by
one of our trained after-sales technicians. If the
appliance is defective, unplug the appliance from the
mains or switch off the circuit breaker in the fuse box.
Contact the after-sales service.
Malfunction table
Problem
Possible cause
The appliance
The plug is not
does not work
plugged in.
Power cut
Faulty fuse
The lighting does
The LED lights
not work.
are defective.
The button illumi-
The control unit is
nation does not
faulty.
work.
--------
LED lights
Defective LED lights may be replaced by the
manufacturer, their customer service or a qualified
technician (electrician) only.
:
Warning
Risk of injury!
The light emitted by LED lights is very dazzling, and can
damage the eyes (risk group 1). Do not look directly
into the switched on LED lights for longer than 100
seconds.
Solution
Connect the appliance to the
electricity supply
Check whether other kitchen
appliances are working
Check in the fuse box to make
sure that the fuse for the
appliance is OK
Call the after-sales service.
Call the aftersales service.
Advertisement
Table of Contents
