Table of Contents
Advertisement
Trouble shooting
Malfunctions often have simple explanations. Please read the
following notes before calling the after-sales service.
:
Risk of electric shock!
Incorrect repairs are dangerous. Repairs may only be carried
out and damaged power cables replaced by one of our trained
after-sales technicians. If the appliance is defective, unplug the
Malfunction table
Fault
The appliance does not work
The lighting is not working
Three consecutive audible signals
Six consecutive audible signals
The remote control is not working
The appliance does not respond to the
remote control
--------
After-sales service
Our after-sales service is there for you if your appliance needs
to be repaired. We will always find the right solution in order to
avoid unnecessary visits from a service technician.
When calling us, please give the product number (E no.) and
the production number (FD no.) so that we can provide you with
the correct advice. The rating plate with these numbers can be
found inside the appliance (remove the metal mesh grease
filter to gain access).
You can make a note of the numbers of your appliance and the
telephone number of the after-sales service in the space below
to save time should it be required.
E no.
After-sales service
O
Accessories for circulated air mode
(not included in the delivery)
Possible cause
The plug is not plugged into the mains
Power cut
The fuse is faulty
The LED lights are defective
The metal grease filter is saturated.
The activated charcoal filter is saturated. Replace the filter; see the "CleanAir air
The battery is empty
The remote control is not connected to
the appliance
FD no.
LZ56700
appliance from the mains or switch off the circuit breaker in the
fuse box. Contact the after-sales service.
LED lights
Defective LED lights must only be replaced by the
manufacturer, their customer service department or a licensed
technician (electrician).
Solution
Connect the appliance to the power
supply
Check whether other kitchen appliances
are working
Check in the fuse box to make sure that
the fuse for the appliance is in working
order
Call the after-sales service
Clean the filter; see section Cleaning
and maintenance.
recirculation module" printed supple-
ment
Change the batteries in the remote con-
trol, see section Cleaning and mainte-
nance
Connect the remote control to the appli-
ance, see section Operating the appli-
ance
Please be aware that a visit by an after-sales engineer will be
charged if a problem turns out to be the result of operator error,
even during the warranty period.
Please find the contact data of all countries in the enclosed
customer service list.
To book an engineer visit and product advice
0344 892 8999
GB
Calls charged at local or mobile rate.
01450 2655
IE
0.03 € per minute at peak. Off peak 0.0088 € per
minute.
Rely on the professionalism of the manufacturer. You can
therefore be sure that the repair is carried out by trained service
technicians who carry original spare parts for your appliances.
LZ56200
9
Advertisement
Table of Contents
