英 文 解 説 Guidance In English 18 - Philips 5000 Series Manual

ENGLISH
Problem
The shaver does
not shave as well
as it used to.
The shaver does
not work when I
press the on/off
button.
Water is leaking
from the bottom
of the shaver.
Possible cause
The shaving heads
are damaged or
worn.
Hairs or dirt
obstruct the
shaving heads.
The shaver is still
attached to the
mains. For safety
reasons, the shaver
can only be used
without cord.
The rechargeable
battery is empty.
The travel lock
is activated.
The shaving unit is
soiled or damaged
to such an extent
that the motor
cannot run.
During cleaning,
water may collect
between the inner
body and the
outer shell of the
shaver.
33
Solution
Replace the shaving heads
(see chapter 'Replacement').
Clean the shaving heads by
following the steps of the
thorough cleaning method
(see chapter 'Cleaning and
maintenance').
Disconnect the shaver from
the mains and press the on/off
button to switch on the shaver
(see section 'Unplug for use
reminder').
Recharge the battery (see
chapter 'Charging').
Press the on/off button for
3 seconds to deactivate the
travel lock.
Clean the shaving heads or
replace them (see chapters
'Cleaning and maintenance'
and 'Replacement').
This is normal and not
dangerous because all
electronics are enclosed in a
sealed power unit inside the
shaver.