Table of Contents
Advertisement
About Bluetooth
Panasonic bears no responsibility for data
and/or information that is compromised
during a wireless transmission.
∫ Frequency band used
This system uses the 2.4 GHz frequency band.
∫ Certification of this device
≥ This system conforms to frequency
restrictions and has received certification
based on frequency laws. Thus, a wireless
permit is not necessary.
≥ The action below are punishable by law in
some countries:
jTaking apart or modifying the unit.
jRemoving specification indications.
∫ Restrictions of use
≥ Wireless transmission and/or usage with all
Bluetooth
equipped devices is not
®
guaranteed.
≥ All devices must conform to standards set by
Bluetooth SIG, Inc.
≥ Depending on the specifications and settings
of a device, it can fail to connect or some
operations can be different.
≥ This system supports Bluetooth
features. But depending on the operating
environment and/or settings, this security is
possibly not sufficient. Transmit data
wirelessly to this system with caution.
≥ This system cannot transmit data to a
Bluetooth
device.
®
∫ Range of use
Use this device at a maximum range of 10 m.
The range can decrease depending on the
environment, obstacles or interference.
∫ Interference from other devices
≥ This system may not function properly and
troubles such as noise and sound jumps may
arise due to radio wave interference if the main
unit is located too close to other Bluetooth
devices or the devices that use the 2.4 GHz band.
≥ This system may not function properly if radio
waves from a nearby broadcasting station,
etc. are too strong.
∫ Intended usage
≥ This system is for normal, general use only.
≥ Do not use this system near equipment or in
an environment that is sensitive to radio
frequency interference (example: airports,
hospitals, laboratories, etc.).
Unit care
®
∫ Clean this system with a soft, dry
≥ When dirt is heavy, wring a cloth moistened in
≥ When cleaning the speakers, use a fine cloth.
≥ Never use alcohol, paint thinner or benzine to
≥ Before using chemically-treated cloth,
∫ To dispose or transfer this system
This system may keep the user settings
information in the main unit. If you discard the
main unit either by disposal or transfer, then
follow the procedure to return all the settings to
the factory presets to delete the user settings.
(
≥ The operation history may be recorded in the
security
®
®
cloth
water tightly to wipe the dirt, and then wipe it
with a dry cloth.
Do not use tissues or other materials (towels,
etc.) that can fall apart. Small grains may get
stuck inside the speaker cover.
clean this system.
carefully read the instructions that came with
the cloth.
28, "To return to the factory preset.")
memory of the main unit.
33
SQT0936
Advertisement
Table of Contents
