Do you have a question about the LFC2C19 and is the answer not in the manual?
Questions and answers
Graham Barry Morley
February 21, 2025
Start pause button lights up then starts blinking and beep sound is emitted.
Dishwasher refuses to start
1 comments:
Mr. Anderson
February 21, 2025
The START/PAUSE button on the Ariston LFC2C19 dishwasher blinks and beeps, preventing it from starting, if the previous wash cycle was interrupted due to a power failure or if the door was opened. To resume the cycle from where it was interrupted, press the START/PAUSE button. Additionally, if the dishwasher does not start, check for issues such as a bent drain hose, a blocked sink drain pipe, or a clogged filter.
Page 1
DAILY REFERENCE GUIDE THANK YOU FOR BUYING A ARISTON PRODUCT. You can download the Safety Instructions and the Use In order to receive a more complete assistance, please and Care Guide, by visiting our website register your appliance on: www.aristonbrand.com www.aristonbrand.com and following the Instructions...
FIRST TIME USE SALT, RINSE AID AND DETERGENT ADVICE REGARDING THE FIRST TIME USE FILLING THE RINSE AID DISPENSER After installation, remove the stoppers from the racks and the retaining Rinse aid makes dish DRYING easier. The rinse aid dispenser A should elastic elements from the upper rack.
PROGRAMS TABLE Detergent Duration of Water Energy dispenser Program Available options wash program consumption consumption (h:min) (litres/cycle) (kWh/cycle) 1. Eco 50° 2:40 0.86 2. Intensive 65° 2:30 16.5 1.65 3. Everyday 55° 2:00 1.35 4. Express 30’ 50° 0:30 0.50 5.
Page 4
OPTIONS AND FUNCTIONS OPTIONS can be selected directly by pressing the corresponding button (see CONTROL PANEL). If an option is not compatible with the selected program see PROGRAMS TABLE, the corresponding LED flashes rapidly 3 times and beeps will sound. The option will not be enabled. HALF LOAD TABLET (Tab) If there are not many dishes to be washed, a half load...
DAILY USE MODIFYING A RUNNING PROGRAM 1. CHECK WATER CONNECTION Check that the dishwasher is connected to the water supply and If a wrong program was selected, it is possible to change it, provided that the top is open. that it has only just begun: press and hold the ON/OFF button, the 2.
LOADING THE RACKS UPPER RACK LOWER RACK For pots, lids, plates, salad bowls, cutlery etc. Large plates and lids should Load delicate and light dishes: glasses, cups, saucers, low salad bowls. ideally be placed at the sides to avoid interferences with the spray arm. The lower rack has tip-up supports which can be used in a vertical position when arranging plates or in a horizontal position (lower) to load pans and salad bowls easily.
CARE AND MAINTENANCE CLEANING THE FILTER ASSEMBLY CLEANING THE SPRAY ARMS Regularly clean the filter assembly so that the filters do not clog and On occasions, food residue may become encrusted onto the spray arms that the waste water flows away correctly. and block the holes used to spray the water.
TROUBLESHOOTING Your dishwasher may not work properly. Before contacting the Service Centre check if the problem can be solved by going through the following list. PROBLEMS POSSIBLE CAUSES SOLUTIONS The dishwasher The appliance has not been plugged in Insert the plug into the socket. won’t start or does properly.
Need help?
Do you have a question about the LFC2C19 and is the answer not in the manual?
Questions and answers
Start pause button lights up then starts blinking and beep sound is emitted. Dishwasher refuses to start
The START/PAUSE button on the Ariston LFC2C19 dishwasher blinks and beeps, preventing it from starting, if the previous wash cycle was interrupted due to a power failure or if the door was opened. To resume the cycle from where it was interrupted, press the START/PAUSE button. Additionally, if the dishwasher does not start, check for issues such as a bent drain hose, a blocked sink drain pipe, or a clogged filter.
This answer is automatically generated