Panasonic AJ-HDC27V Operating Instructions Manual page 64

Setup card operations
Give a title to the selected file.
9
Turn the JOG dial button to move the arrow
(cursor) to the WRITE item.
< C A M C A R D R E A D / W R I T E >
S E L E C T
R E A D
S E L E C T
n W R I T E
C A R D C O N F I G
R E A D U S E R D A T A
T I T L E
10
When the JOG dial button is pressed, the
following message appears.
< C A M C A R D R E A D / W R I T E >
R E A D
S E L E C T
W R I T E
S E L E C T
C A R D C O N F I G
R E A D U S E R D A T A
T I T L E
W R I T E ?
Y E S
n N O
T I T L E
11
Turn the JOG dial button to move the arrow
(cursor) to YES, and press the JOG dial button.
When the data saving is completed, the
following message appears.
< C A M C A R D R E A D / W R I T E >
R E A D
S E L E C T
W R I T E
S E L E C T
C A R D C O N F I G
R E A D U S E R D A T A
T I T L E
W R I T E O K
Y E S
n N O
T I T L E
To save the VTR unit's data, open the VTR CARD
READ/WRITE screen, and perform steps
: 1
: 1
:
: 1
: 1
:
:
: 1
: 1
:
:
9 11
to .
If one of the following messages appears when the JOG dial
button is pressed, the data cannot be saved.
Error message
WRITE NG
NO CARD
(setup card has not been
inserted)
WRITE NG
FORMAT ERROR
(formatting error)
WRITE NG
ERROR
(the data cannot be saved)
12
Press the MENU button to exit the menu
operations.
The setting menu is cleared, and the display
showing the unit's current statuses appears at
the top and bottom of the viewfinder screen.
64
Remedial action
Insert the card.
The card was formatted by a
device other than the unit.
Replace the card.
The card may be defective.
Replace it.