Table of Contents
Advertisement
Using the On-Screen Display (OSD) controls
To adjust the settings, the user controls can be viewed through the OSD.
Input Signal: HDMI
To use the controls:
1. Press
to open the main OSD menu.
2. Use
or
there is a sub-menu, you can move between options using
that function. Use
3. Press
to move backwards through the sub-menus and exit from the OSD.
4. Press and hold
to the OSD. Press and hold
the OSD.
5. Enables DDC/CI by default. Use OSD Exit Key, Press and hold
disable / enable DDC/CI function. The words "DDC/CI disable" shows on the screen.
G25-20
Model
Resolution
Max Refresh Rate
Mode
Firmware
Serial Number
to move among the icons. Select an icon and press
or
to make adjustments. Press
for 10 seconds to lock the OSD. This will prevent accidental adjustments
for 10 seconds to unlock the OSD and allow adjustments to
1920x1080
60Hz
@
G25-20
1920x1080
60.0Hz
Normal
L**.*
Serial Number
to access that function. If
or
, then press
to save.
for 10 seconds to
Chapter 2.
to select
2-4
Advertisement
Table of Contents
