Panasonic PT-DZ770EL Operating Instructions (Functional Manual) page 90

[NETWORK] menu
■ [Basic control] page ▶
Click [Projector control] → [Basic control].
■ [Detail control] page ▶
Click [Projector control] → [Detail control].
90 - ENGLISH
(1) [POWER]
(1)
Switches the power on/off.
(2)
(2) [SHUTTER]
(3)
Switches between use or not use of the shutter
(4)
function.
(3) [OSD]
(5)
Switches between on (display)/off (no display) of the
on-screen display function.
(4) [SYSTEM]
Switches the system method.
(5) On-screen display of the projector
(6)
Displays the same content as the on-screen display
of the projector. The settings of the menu can be
checked or changed. This is displayed even when
the on-screen display function is set to off (hide).
(6) [INPUT SELECT]
Switches the input signal.
(1) Control of the projector
The projector is controlled by clicking the buttons in
the same way as the buttons on the remote control.
After the projector is controlled, the on-screen
display of the projector on the right side of the
control page is updated.
(2) [LENS]
(1)
Adjusts the projection lens.
(3) [TEST PATTERN]
(2)
Displays the test pattern.
(3)
(4) [GET OSD]
Updates the on-screen display of the projector at the
(4)
right of the control page.
(5) [SUB MEMORY]
(5)
Switches the sub memory.
(6)
(6) [SYSTEM DAYLIGHT VIEW]
(7)
Switches to system daylight view settings.
(8)
(7) [FREEZE]
Temporarily pauses the image.
(8) [SIDE BY SIDE]
Displays two different input signals simultaneously.