Setting Up; Projection Method; Parts For Ceiling Mount (Optional) - Panasonic PT-DW730EL Operating Instructions (Functional Manual)

Setting up

Projection method

You can use the projector with any of the following four projection methods. Select the appropriate method
depending on the environment.
■ Mounting on the ceiling and
projecting forward
Menu item *1
[PROJECTION
METHOD]
[COOLING
CONDITION]
■ Mounting on the ceiling and
projecting from rear
(Using the translucent screen)
Menu item
*1
[PROJECTION
METHOD]
[COOLING
CONDITION]
*1: For details of the menu items, confirm from the [PROJECTOR SETUP] menu  [PROJECTION METHOD] (
[COOLING CONDITION] (

Parts for ceiling mount (optional)

You can install the projector on the ceiling using the optional ceiling mount bracket (ET-PKD56H: for high ceilings,
ET-PKD55S: for low ceilings).
z Use only the ceiling mount brackets specified for this projector.
z Refer to the installation manual for the ceiling mount bracket when you install the bracket and the projector.
Attention
z To ensure the projector performance and security, installation of the ceiling mount bracket must be carried out
by your dealer or a qualified technician.
Method
[FRONT/CEILING]
[CEILING SETTING]
Method
[REAR/CEILING]
[CEILING SETTING]
page 62).

■ Setting on a desk/floor and
projecting from rear
(Using the translucent screen)
Menu item *1
[PROJECTION
METHOD]
[COOLING
CONDITION]
■ Setting on a desk/floor and
projecting forward
Menu item
*1
[PROJECTION
METHOD]
[COOLING
CONDITION]
Setting up
Method
[REAR/FLOOR]
[FLOOR SETTING]
Method
[FRONT/FLOOR]
[FLOOR SETTING]
page 61) and

ENGLISH - 21