Introduction; Safety Information - Chambers MVW102BSS Installation And User Manual

INTRODUCTION

Thank you for choosing this cooker hood.
This instruction manual is designed to provide you with all required
instructions related to the installation, use, maintenance, and warranty of the
appliance. Please read this instruction manual carefully before installation
and operating your range hood. This range hood is made from high quality
materials and has a streamlined design. Equipped with a powerful electric
motor and centrifugal fan, your range hood will provide excellent ventilation
and low noise operation.
1. IMPORTANT SAFETY INFORMATION
Intended for Domestic Kitchen Use Only
Warning:
TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK OR PERSONAL INJURY,
PLEASE OBSERVE THE FOLLOWING:
1. Installation and electrical work must be done by a qualified TECHNICIAN
in accordance with all applicable codes and standards.
2. If the supply cord is damaged, it must be replaced by the manufacturer, its service
agent or a similarly qualified person to avoid a hazard. Do not use an extension cord.
If the power supply cord is too short, have a qualified electrician install an outlet
near the appliance. Any modifications that may be required to the home's electrical
system for the installation of the range hood must only be made by qualified
electricians.
3. Before servicing or cleaning unit, unplug or disconnect the range hood from the
power supply to prevent power from being switched on accidentally.
4. Use this unit only in the manner intended by the manufacturer.
5. Sufficient air is needed for combustion and exhausting of gases through the
chimney of fuel burning equipment to prevent back drafting. Follow the heating
equipment manufacturer's guidelines and safety standards such as those
published by the National Fire Protection Association (NFPA), and the
American Society for Heating, Refrigeration and Air Conditioning
Engineers (ASHRAE), and the local code authorities.
6. When cutting or drilling into wall or ceiling, be careful NOT to Damage
existing electrical wiring and other hidden utilities.
3