Table of Contents
Advertisement
6. INSTALLATION (RECIRCULATING)
If you cannot vent your range hood externally, an exhaust pipe is not required. A
recirculating kit can be used to clean the air and trap odors.
1. To install the activated carbon filter, the grease filters should be removed
first. Press down the locking tab to remove the filters.
2. Attach the activated carbon filter to the air intake and turn it in a
clockwise direction. Repeat on the other side.
NOTE:
*
Make sure the filter is securely locked. Otherwise, it may become loose and cause damage
or injury.
12
Advertisement
Table of Contents
