Table of Contents
Advertisement
On Screen Display(OSD) Selection and Adjustment
Main menu
SETUP
MENU : Exit
: Adjust
: Adjust
SET
: Select another
sub-menu
NOTE
If this does not improve the screen image, restore the factory default settings. If necessary, execute the
WHITE BALANCE function again. This function will be enabled only when the input signal is an analog
signal.
Sub menu
LANGUAGE
To choose the language in which the
control names are displayed.
OSD
To adjust position of the OSD window
POSITION
on the screen.
WHITE
If the output of the video card is different
BALANCE
the required specifications, the color
level may deteriorate due to video signal
distortion. Using this function, the signal
level is adjusted to fit into the standard
output level of the video card in order to
provide the optimal image.
Activate this function when white and
black colors are present in the screen.
Use this function to set the power
POWER
indicator on the front side of the monitor
INDICATOR
to ON or OFF.
If you set OFF, it will go off.
If you set ON at any time, the power
indicator will automatically be turned on.
Restore all factory default settings except
FACTORY
"LANGUAGE."
RESET
Press the
18
Description
,
buttons to reset immediately.
Advertisement
Table of Contents
