Table of Contents
Advertisement
Eco Saving Plus
The
Eco Saving Plus
function reduces power consumption by controlling the electric current used by
the monitor panel.
― This option is not available when
Bright
― This menu is not available when
Game Mode
― This menu is not available when
Eye Saver Mode
•
Off: Deactivate the
Eco Saving Plus
function.
•
Auto: The power consumption will automatically be reduced by about 10% over the current setting.
(The reduction of power consumption depends on the customer screen brightness condition.)
•
Low: The power consumption will be reduced by 25% over the default setting.
•
High: The power consumption will be reduced by 50% over the default setting.
Off Timer
Off
Timer: Turn on
Off Timer
mode.
Turn Off
After: The off timer can be set within a range of 1 to 23 hours. The product will automatically
power off after the specified number of hours.
― This option is only available when
Off Timer
― For products for the market in some regions, the
product powers on. This is done in accordance with power supply regulations. If you do not want the timer
to activate, go to
System
and set
Off Timer
is in
Dynamic Contrast
mode.
is enabled.
is enabled.
is set to On.
Off Timer
is set to automatically activate 4 hours after the
to Off.
PC/AV Mode
Set
PC/AV Mode
to AV. The picture size will be enlarged.
This option is useful when you view a movie.
•
Set to
PC
when connected to a PC.
•
Set to
AV
when connected to an AV device.
― Supplied for the wide models only such as 16:9 or 16:10.
― If the monitor is in
HDMI/DisplayPort
mode and the screen says
activates, press the JOG button to display the function-button screen and then select the
can select
PC
or AV.
DisplayPort Ver.
Select your Displayport. Displayport 1.1 supports High Bit Rate 1, while 1.2 supports High Bit Rate 2.
― Incorrect settings may cause the screen to go blank. If this occurs, check the device specifications.
― If the monitor is in
HDMI/DisplayPort
mode and the screen says
activates, press the JOG button to display the function-button screen and then select the
can select
1.1
or 1.2.
Source Detection
Select either
Auto
or
Manual
as the method to recognize input signal.
Check Signal Cable
or power saving mode
icon. You
Check Signal Cable
or power saving mode
icon. You
30
Advertisement
Table of Contents
