Table of Contents
Advertisement
Quick Links
USER MANUAL
Gaming Monitor
C27G7*T* C32G7*T*
The colour and the appearance may differ depending on the product, and the specifications are subject to change without prior
notice to improve the performance.
The contents of this manual are subject to change without notice to improve quality.
© Samsung
Samsung owns the copyright for this manual.
Use or reproduction of this manual in parts or entirety without the authorization of Samsung is prohibited.
Trademarks other than that of Samsung are owned by their respective owners.
An administration fee may be charged in the following situations:
(a) An engineer is called out at your request, but it is found that the product has no defect (i.e., where the user manual
has not been read).
(b) You bring the unit to a repair centre, but it is found that the product has no defect (i.e., where the user manual has not
been read).
You will be informed of the administration fee amount before a technician visits.
Advertisement
Table of Contents
Related Manuals for Samsung G75T Series
Summary of Contents for Samsung G75T Series
- Page 1 © Samsung Samsung owns the copyright for this manual. Use or reproduction of this manual in parts or entirety without the authorization of Samsung is prohibited. Trademarks other than that of Samsung are owned by their respective owners. An administration fee may be charged in the following situations: (a) An engineer is called out at your request, but it is found that the product has no defect (i.e., where the user manual...
-
Page 2: Table Of Contents
Table of contents Before Using the Product Connecting and Using a Source Device Picture Safety Precautions Read below before installing the product. Picture Mode Electricity and Safety Ports Brightness Installation Operation Connecting and Using a PC Contrast Connection Using the HDMI Cable Cleaning Sharpness Connection Using an HDMI-DVI Cable... - Page 3 System Requirements Off Timer Plus Driver Installation PC/AV Mode USB Super Charging Troubleshooting Guide DisplayPort Ver. Requirements Before Contacting Samsung Input Port Ver. Customer Service Centre Auto Source Switch Product diagnosis (Screen issue) Checking the Resolution and Frequency Key Repeat Time Check the following.
-
Page 4: Before Using The Product
Do not disconnect the power cord while the product is being used. This symbol indicates that this • Only use the power cord provided with your product by Samsung. Do not use the power cord with product has included important DC voltage: Rated voltage marked with other products. -
Page 5: Installation
‒ Be sure to consult Samsung Customer Service Centre if you want to install the product at such a • Do not expose the product to direct sunlight, heat, or a hot object such as a stove. -
Page 6: Operation
‒ Be sure to power off the product and disconnect the power cord when water or other foreign ‒ Contact Samsung Customer Service Centre for repairs. substances have entered the product. Then contact Samsung Customer Service Centre. • To move the product, first disconnect all the cables from it, including the power cable. - Page 7 Caution • Leaving the screen fixed on a stationary image for an extended period of time may cause afterimage • Do not hold the product upside-down or move it by holding the stand. burn-in or defective pixels. ‒ The product may fall and become damaged or cause an injury. ‒...
-
Page 8: Cleaning
High-glossy models can develop white stains on the surface if an ultrasonic wave humidifier is used nearby. ― Contact your nearest Samsung Customer Service Centre if you want to clean the inside of the product (Service fee will be charged.) Do not press the product screen with hands or other objects. -
Page 9: Preparations
Chapter 02 Preparations Installation Adjusting the Product Tilt and Height ― The colour and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Checking the space around the product -2.0° (±2.0°) ~ 92.0° (±2.0°) Make sure to have enough space for ventilation when placing the product. -
Page 10: Rotating The Product
Rotating the Product Anti-theft Lock ― The color and shape of parts may differ from what is shown. Specifications are subject to change without ― An anti-theft lock allows you to use the product securely even in public places. ― The locking device shape and locking method depend on the manufacturer. Refer to the user guide provided notice to improve quality. -
Page 11: Attaching The Bracket Wall
‒ Samsung shall not be held liable for any product damage or personal injury caused by using a wall- mount kit other than the one specified or from an attempt to install the wall-mount kit on your own. -
Page 12: Control Panel
Control Panel Parts Description Multi directional button that helps navigate. ― JOG button is located in the bottom of the screen centre, and has 5 JOG Button ― The colour and shape of parts may differ from what is shown. Specifications are subject to change without directions as UP/DOWN/LEFT/RIGHT/PRESS(ENTER). -
Page 13: Connecting And Using A Source Device
Chapter 03 Connecting and Using a Source Device Read below before installing the product. Ports ― The functions available may vary depending on the product model. The colour and shape of parts may differ Before installing the product, check the shapes of both ports of the supplied signal cables and the shapes and locations of the ports on the product and external device. -
Page 14: Connecting And Using A Pc
Connecting and Using a PC Connection Using an DP Cable Select a connection method suitable for your PC. DP IN 1, DP IN 2 Connection Using the HDMI Cable HDMI IN ― A DP cable shorter under 1.5 m in length is recommended. Using a cable longer than 1.5 m can affect the picture quality. -
Page 15: Connecting The Power
Connecting the Power Connecting the Product to a PC as a USB HUB Using the product as a hub, connect and use various source devices with the product at a time. C27G7*T* Connect the power cable to the AC/DC adapter. Then, connect the AC/DC adapter to the DC 22V port on the back of the product. -
Page 16: Setting Optimum Resolution
Setting Optimum Resolution An information message about setting optimum resolution will appear if you power on the product for the first time after purchase. Select a language on information message and change the resolution on your PC to the optimum setting. ―... -
Page 17: Game
Chapter 04 Game Function Key Guide → → Game ― The functions available may vary depending on the product model. The colour and shape of parts may differ Black Equalizer from what is shown. Specifications are subject to change without notice to improve quality. Adjust the brightness of the dark areas. -
Page 18: Adaptive-Sync (For Nvidia Graphics Card)
• The sound quality of the product may be degraded. ― If you encounter any issues when using the function, contact the Samsung Service Centre. ― When the resolution is changed while setting Adaptive-Sync, the screen tearing can happen intermittently. -
Page 19: Freesync (For Amd Graphics Card)
The sound quality of the monitor may be degraded. ― If you encounter any issues when using the function, contact the Samsung Service Centre. ― If you change the screen resolution while the function is On, the screen may intermittently blank out due to the graphic card. -
Page 20: Low Input Lag
Low Input Lag The aim point is displayed in the middle of the screen. Position adjustment is only possible within the displayed rectangular area. Minimise input lag for fast reactions by reducing the video processing time. ― This menu is not available when Adaptive-Sync FreeSync is enabled. - Page 21 The aim point is adjusted by 1 pixel per single move of the JOG button. After configuring settings is completed, press the Enter key of the JOG button. The aim point is fixed to the specified position and the settings screen disappears. •...
-
Page 22: Screen Size
Screen Size mode • 4:3: Display the picture with an aspect ratio of 4:3. Suitable for videos and standard broadcasts. • 16:9: Display the picture with an aspect ratio of 16:9. Select the best screen size and ratio. ― This menu is not available when •... -
Page 23: Picture
Chapter 05 Picture Function Key Guide → → Picture ― The functions available may vary depending on the product model. The colour and shape of parts may differ mode from what is shown. Specifications are subject to change without notice to improve quality. When the external input is connected through HDMI/DP and PC/AV Mode is set to AV,... -
Page 24: Brightness
Brightness Color You can adjust the general brightness of the picture. (Range: 0~100) Adjust the tint of the screen. ― This menu is not available when A higher value will make the picture appear brighter. Eye Saver Mode is enabled. ―... -
Page 25: Black Level
Black Level Eye Saver Mode If a DVD player or set-top box is connected to the product via HDMI, image quality degradation (contrast/ Set to an optimum picture quality suitable for eye relaxation. colour degradation, black level, etc.) may occur, depending on the connected source device. TÜV Rheinland “Low Blue Light Content”... -
Page 26: Configuring The Pip/Pbp Settings
Chapter 06 Configuring the PIP/PBP Settings Function Key Guide → → PIP/PBP ― The functions available may vary depending on the product model. The colour and shape of parts may differ Screen Position from what is shown. Specifications are subject to change without notice to improve quality. ―... -
Page 27: Sound Source
Sound Source Screen Ratio Set which screen you want to hear the sound for. Set the Screen Ratio for PBP mode. mode PIP mode • Auto: Display the picture according to the aspect ratio of the input source. • Wide: Display the picture in full screen regardless of the aspect ratio of the input source. mode PBP mode •... -
Page 28: Onscreen Display
Chapter 07 OnScreen Display Function Key Guide → → OnScreen Display ― The functions available may vary depending on the product model. The colour and shape of parts may differ Display Time from what is shown. Specifications are subject to change without notice to improve quality. The OSD menu will automatically disappear if the menu is not used for a specified period of time. -
Page 29: System
Chapter 08 System Function Key Guide → → System ― The functions available may vary depending on the product model. The colour and shape of parts may differ Volume from what is shown. Specifications are subject to change without notice to improve quality. Adjust the Volume controlling the JOG button LEFT/RIGHT. -
Page 30: Off Timer Plus
Off Timer Plus USB Super Charging Charge the battery of a connected source device quickly using the port on the product. Configuring Off Timer • Off: Disable USB Super Charging. Timer: Turn on Off Timer mode. • On: Enable the function to quickly charge a source device connected to the port. -
Page 31: Input Port Ver
Input Port Ver. Power LED On Select an HDMI version. Configure the settings to enable or disable the power LED located at the lower part of the product. ― The supportable device and resolution may differ depending on its version. •... -
Page 32: Support
Update software using an update file on a USB device. Self Diagnosis Save the update file (in .bin format) that you downloaded from the Samsung website (http://www. samsung.com/sec) to a USB storage device. Connect the USB device to the SERVICE port ( ) on the monitor. -
Page 33: Information
Information View the current input source mode, frequency and resolution that are in use and the current product version. Reset All Return all the settings for the product to the default factory settings. -
Page 34: Installing The Software
Driver Installation ― You can set the optimum resolution and frequency for this product by installing the corresponding drivers. ― To install the latest version of the product driver, download it from the Samsung website at http://www. samsung.com. Easy Setting Box enables users to use the product by partitioning multiple sections. -
Page 35: Troubleshooting Guide
Check the following. Customer Service Centre Installation issue (PC mode) ― Before calling Samsung Customer Service Centre, test your product as follows. If the problem persists, contact Samsung Customer Service Centre. The screen keeps switching on and off. Check the cable connection between the product and PC, and ensure the connectors are locked. - Page 36 The message Check the cable connection and the settings of the source device. appears. Text is blurry. Check that the cable is properly connected to the product. If using a Windows OS (e.g. Windows 7, Windows 8, Windows 8.1 or Windows 10): Go to Control Panel → Fonts →...
-
Page 37: Q & A
Q & A ― Refer to the user manual for your PC or graphics card for further instructions on adjustment. ― The path to the settings depends on the installed OS. How can I change the frequency? Set the frequency on your graphics card. •... -
Page 38: Specifications
― The above specifications are subject to change without notice to improve quality. Based on the AC voltage of the adapter. For the DC voltage of the ― For detailed device specifications, visit the Samsung website. product, refer to the product label. -
Page 39: Standard Signal Mode Table
Standard Signal Mode Table Synchronization (PANEL Spec) Horizontal Frequency 70.56 - 357.6 kHz Vertical Frequency 48 - 240 Hz Resolution Optimum resolution 2560 x 1440 @ 144 Hz (HDMI) 2560 x 1440 @ 240 Hz (DisplayPort) Maximum resolution If a signal that belongs to the following standard signal modes is transmitted from your PC, the screen will automatically be adjusted. If the signal transmitted from the PC does not belong to the standard signal modes, the screen may be blank even though the power LED turns on. - Page 40 Port Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (H/V) HDMI IN DP IN VESA, 1440 x 900 55.935 59.887 106.500 VESA, 1600 x 900 60.000 60.000 108.000 VESA, 1680 x 1050 65.290 59.954 146.250 VESA, 1920 x 1080 67.500 60.000 148.500...
-
Page 41: Appendix
• Use of supplies or separately sold product unspecified by Samsung. • Repair from a person besides an engineer of outsourcing service company or partner of Samsung Not a product defect Electronics Co., Ltd. • Remodeling or repairing the product by customer.