Replacing The Lamp - LG BX327 Owner's Manual

Information

Replacing the Lamp

Lamp Replacement
The change interval of lamp may depend on the use environment of
Projector. You can see the used lamp time in the Lamp Time section of
the Menu.
You must replace the lamp when:
* The projected image gets darker or starts to deteriorate.
* The lamp indicator is red.
* The message "Replace the lamp" appears on the screen when
turning the projector on.
Be careful when replacing lamp
- Press the POWER button on the control panel or remote control to turn off power.
- If the operation indicator LED is orange and blinking, do not disconnect the main supply until the operation
indicator LED
is lit up constantly (orange).
- Allow the lamp to cool for 1 hour before replacing it.
- Replace only with the same type lamp from an LG Electronics Service Center. Using another manufacturers lamp
may cause damage to the Projector and lamp.
- Pull out the lamp only when replacing the lamp.
- Keep the lamp unit out of reach of children. Keep the Lamp away from heat sources such as radiators, stoves etc.
- To reduce the risk of fire do not expose the lamp to liquids or foreign materials.
- Do not place the lamp near any heat source.
- Make sure the new lamp is securely tightened with screws. If not, the image may be dark or there could be an
increased risk of fire.
- Never touch the lamp unit glass otherwise image quality may be compromised or lamp life maybe reduced.
To obtain a replacement Lamp unit
Lamp model number is on page 54. Check the lamp model and then purchase it from an LG
Electronics Service Center.
Using another manufacturers lamp may cause damage to the projector.
Lamp unit disposal
Dispose of the used lamp by returning it to the LG Electronics Service Center.
50
<Front panel of the Projector>
Lamp indicators
Operation Indicator
/ Temperature
Indicator