Table of Contents
Advertisement
Quick Links
Table of Contents
Safety Instructions ................................................. 2
Product Features ................................................... 5
Package Overview ................................................. 6
Product Overview .................................................. 7
Connection Ports ................................................ 8
Control Panel ...................................................... 9
Remote Control ................................................. 10
Remote Control Operating Range .................... 12
Connecting the Projector ..................................... 13
Connect to Computer/Notebook ....................... 13
Connect to Video .............................................. 14
Powering On/Off the Projector ............................. 15
Powering On the Projector ................................ 15
Powering Off the Projector ................................ 16
Warning Indicator .............................................. 17
Adjusting the Projected Image ............................. 18
Adjusting the Height of Projector Image ........... 18
Adjusting the Projector's Focus ........................ 19
Adjusting Projection Image Size ....................... 19
On Screen Display ............................................... 21
How to operate ................................................. 21
IMAGE .............................................................. 22
IMAGE | Advanced ........................................... 24
IMAGE | Advanced | Input Source .................... 25
SCREEN ........................................................... 26
SETTING | Language ....................................... 29
SETTING .......................................................... 30
SETTING | Network .......................................... 32
SETTING | Signal ............................................. 33
SETTING | Advanced ....................................... 34
OPTIONS .......................................................... 35
OPTIONS | Lamp Settings ................................ 37
OPTIONS | Security Setting ............................. 38
OPTIONS | Advanced ....................................... 39
INFORMATION ................................................. 40
Table of Contents
Lan Module User's Guide .................................... 41
Preface ............................................................. 41
Network Connection ......................................... 41
Webpage Operations ........................................ 42
Troubleshooting ................................................... 45
Replacing the lamp .............................................. 50
Compatibility Mode .............................................. 51
Computer Compatibility (Analog) ...................... 51
Computer Compatibility (HDMI) ........................ 52
Configurations of Terminals ................................. 54
Terminal : Mini DIN 3-pin .................................. 54
RS232 Command Table.................................... 55
Dimensions .......................................................... 57
Regulation & Safety Notices ................................ 58
English
English
Advertisement
Table of Contents
Related Manuals for LG BW286
Summary of Contents for LG BW286
-
Page 1: Table Of Contents
Table of Contents Usage Notice Safety Instructions ... 2 Introduction Product Features ... 5 Package Overview ... 6 Product Overview ... 7 Connection Ports ... 8 Control Panel ... 9 Remote Control ... 10 Remote Control Operating Range ... 12 Installation Connecting the Projector ... -
Page 2: Usage Notice
Usage Notice Safety Instructions Please take note of the safety instructions to prevent any poten- tial accident or misuse of the projector. Safety Instructions are given in two forms as detailed below. WARNING : The violation of this instruction may cause serious injuries and even death. NOTES : The violation of this instruction may cause injuries or damage to the projector. After reading this manual, keep it in the place that you can access easily. - Page 3 Power Never touch the power plug with a Do not plug-in too many items into wet hand one power outlet. This may cause an electric shock- It may result in overheating of the hazard! outlet and create a fire hazard! Power Hold the plug firmly when unplug- Do not use if the power cord or the...
- Page 4 Usage Notice Using If the projector is in a room that experiences a gas leak, do not touch the projector. It can cause a fire or a burn by a spark. Do not place heavy objects on top of projector. This may cause mechanical failure orpersonal injury! Do not use any sharp tools on the...
-
Page 5: Introduction
Product Features This product is an WXGA single chip 0.65”/XGA single chip 0.55” DLP projector. ® Outstanding features include: WXGA (1280x800)/XGA (1024x768) Native resolution ■ One built-in speaker with 8 watt amplifier ■ HDTV compatible (720P, 1080i/p) ■ RGB monitor Loop Thru (works on standby mode > 1W) ■ BrilliantColor Technology ■ RS232C control ■ Introduction English English... -
Page 6: Package Overview
Introduction Package Overview This projector comes with all the items shown below. Check to make sure your unit is complete. Contact your dealer immediately if anything is missing. Due to the differ- ence in applications for each country, some regions may have dif- ferent accessories. English Projector with lens cap Wireless Remote Control Power Cable Documentation: CD-ROM User’s Manual Battery RGB Cable... -
Page 7: Product Overview
Introduction Product Overview 1. Control Panel 2. Remote Sensors 3. Focus Ring 4. Lens 5. Lens Cap 6. Adjustable feet 7. Ventilation (inlet) 8. Ventilation (outlet) English English... -
Page 8: Connection Ports
Introduction 1. AC IN 2. RJ45 Connector 3. HDMI Connector 4. * RGB OUT Connector “*” for “RGB IN 1 Connector” only 5. RGB IN 1 Connector 6. RGB IN 2 Connector 7. S-VIDEO In Connector Kensington Security System T his projector has a Kensington Security System Connector on the side panel. Connect the Kensington Security System cable as below. F or the detailed installation and use of the Kensington Security System, refer to the user’s guide included with the Kensington Security System set. And for further information, contact http://www.kensington.com, the internet homepage of the Kensington company that deals with expensive electronic equipment such as notebook PCs or projectors. T he Kensington Security System is an optional item. -
Page 9: Control Panel
Control Panel MENU POWER Refer to the “Power On/Off the Pro- jector” section on pages 15~16. POWER LED Indicate the projector’s status. LAMP LED Indicate the projector’s lamp status. TEMP LED Indicate the projector’s temperature status. KEYSTONE Adjust the image to compensate for distortion caused by tilting the projec- tor. Four Direction- Use or or or to select items al Select Keys or make adjustments to your selec- tion. SOURCE Press “SOURCE” to select an input signal. MENU Press “MENU” to launch the on- screen display (OSD) menu. To exit OSD, Press “MENU” again. VOLUME Adjust to increase / decrease the volume. Confi rm your item selection. AUTO Automatically synchronizes the pro- jector to the input source. -
Page 10: Remote Control
Introduction You can only turn the projector on/off with POWER button on the projector. You can operate all of the functions of the projector via the remote control. Make sure not to lose the remote control. English Remote Control Infrared trans- Sends signals to the projector. mitter LED Indicator. Power Refer to the “Power On/Off the Pro- jector” section. (See pages 15~16) Confirm your section of items in sub menu operation. Four Use Directional make adjustments to your selection. Select Keys to select items or or or or... - Page 11 Menu Press “Menu” to launch the Onscreen display (OSD), back to the top level of OSD for the OSD main menu opera- tion Exit Press “Exit” to close the OSD menu. Zoom+ Zoom in the projector display. Reset Return the adjustments and settings to the factory default values. (except for lamp counter) Auto Automatically synchronize the projector to the input source. Source Press “Source” to choose RGB, S-Video, Composite and HDMI sources. Zoom- Zoom out the projector display. Volume +/- Increase/decrease speaker volume. Keystone +/- Adjust the image to compensate for distortion caused by tilting the projector. Image Select the Image mode from Presentation, Bright, Movie, sRGB, and User. AV Mute Momentarily turn off/on the audio and video. Ratio Use this function to choose your desired aspect ratio. RGB1 Press “RGB1” to choose RGB IN 1 connector.
-
Page 12: Remote Control Operating Range
Introduction Point the remote control toward the projector (Infrared Re- mote Receiver) when pressing any button. Maximum operat- ing range for the remote control is about 23.0’ (7m) and 30° in front of the projector. English Video Press “Video” to choose VIDEO connector. Still Pause the screen image. Press again to resume the screen image. Remote Control Operating Range 23.0’ (7m) 23.0’ (7m) Approx.15° 23.0’ (7m) Approx.15°... -
Page 13: Installation
Connecting the Projector Connect to Computer/Notebook Due to the differ- ence in applications for each country, some regions may have differ- ent accessories. 1...Power cable (supplied) 2... RGB cable (supplied) 3...RS232C cable 4... Audio cable Jack/Jack 5... DVI/HDMI cable 6...Network cable 7... Monitor out cable Installation RGB, DVI Monitor Output English English... -
Page 14: Connect To Video
Installation Due to the differ- ence in applications for each country, some regions may have dif- ferent accessories. 1...Power cable (supplied) 2... RGB to RCA adaptor 3...3 RCA Component Cable 4... Composite video cable 5... S-Video cable 6...Audio cable Jack/RCA 7...HDMI cable 8...Network cable English Connect to Video DVD player, Set-top Box HDTV receiver S-Video Output DVD player, Set-top Box HDTV receiver Video Output... -
Page 15: Powering On/Off The Projector
Powering On/Off the Projector Powering On the Projector 1. Ensure that the power cable and signal cable are securely connected. The POWER LED will turn orange. 2. R emove the lens cap. 3. T urn on the lamp by pressing “POWER” on the control panel or the remote control. The POWER LED will fl ash green. The startup screen will display in approximately 5 seconds. When disappear startup screen, the POWER LED will turn green. 4. T urn on your source (computer, notebook, video player, etc.) The projector will detect your source automatically. I f you connect multiple sources at the same time, use the “SOURCE” on the remote control or use “RGB”, “S-video”, “Video”, “HDMI” on the remote control to switch inputs. Turn on the projec- tor fi rst and then the signal sources. -
Page 16: Powering Off The Projector
Installation 1. P ress the “POWER” to turn off the projector lamp, you will 3. T he cooling fan continues to operate for about 60 seconds for 4. D isconnect the power cable from the electrical outlet and the 5. D o not turn on the projector immediately following a power English Powering Off the Projector see a message as below on the on-screen display. Press the “POWE R” again to confirm. cooling cycle and the POWER LED will flash green. When the POWER LED flashes orange, the projector has entered standby mode. -
Page 17: Warning Indicator
Warning Indicator W hen the “TEMP” LED indicator lights red, it indicates the projector has overheated. The projector will automatically switch to eco mode. When the projector keep overheated for 60 seconds under eco mode, the projector will automatically shut itself down. If the problem persists, you should contact your local dealer or our service center. W hen you see the message below displays on-screen, the projector has detected that the lamp is approaching its end of life. Please change the lamp as soon as possible or contact your local dealer or our service center. W hen the “TEMP” LED indicator flashes red and the mes- sage below displays on-screen, it indicates the fan failed. Stop using the projector and disconnect the power cable from the electrical outlet, then contact your local dealer or our service center. Installation English English... -
Page 18: Adjusting The Projected Image
Installation Adjusting the Projected Image The projector is equipped with adjustable feet to raise and lower the image to fill the screen. To raise/lower the image: You can raise the projector front up to 4 degrees by rotating the adjustable feet. English Adjusting the Height of Projector Image 1. U se to fine-tune the display angle Adjustable feet Maximum Length: 13.8 mm... -
Page 19: Adjusting The Projector's Focus
Adjusting the Projector’s Focus To focus the image, rotate the focus ring until the image is clear. The projector will focus at distances from 1.3 to 32.8 feet (0.4 to 10.0 meters) with mechanical travel. Adjusting Projection Image Size WXGA model H : A = 8.065 B ÷ H x 100% = 112.4%(Offset) Lens Center 35.6" (90.5cm) Lens Center 1.3'(0.4m) 4.9'(1.5m) 9.8'(3.0m) 14.8'(4.5m) 19.7'(6.0m) 26.2'(8.0m) 32.8'(10.0m) Screen 35.6” (Diagonal) (90.5cm) Screen Size 30.2”x18.9”... - Page 20 Installation XGA model Lens Center 1.3'(0.4m) 4.9'(1.5m) 9.8'(3.0m) 14.8'(4.5m) 19.7'(6.0m) 26.2'(8.0m) 32.8'(10.0m) Screen (Diagonal) (79.9cm) Screen Size 25.1”x18.8” Max.(WxH) 63.9x47.9cm (7.20cm) Distance 1.3’ (0.4m) 4.9’ (1.5m) 9.8’ (3.0m) 14.8’ (4.5m) 19.7’ (6.0m) 26.2’ (8.0m) 32.8’ (10.0m) This graph is for user’s reference only. English H : A = 6.67 B ÷...
-
Page 21: User Controls
On Screen Display The Projector has multilingual On-screen Display menus that allow you to make image adjustments and change a variety of settings. The projector will automatically detect the source. How to operate T o open the OSD, press “MENU” on the Remote Control or Con- trol Panel. W hen OSD is displayed, use keys to select any item in the main menu. While making a selection on a particular page, press or “OK” key to enter sub menu. 3. U se adjust the settings using key. I f the setting has sub menu. Press “MENU” to close the sub menu after adjustment. A fter adjusting the settings, press “MENU” go back to the main menu. 6. T o exit, press “MENU” again. The OSD will be closed and the pro- jector will automatically save the new settings. If no button op- eration is made for 30 seconds, the OSD will be closed automatically. Sub Menu User Controls keys to select the desired item in the sub menu and... -
Page 22: Image
User Controls Image Mode Brightness Contrast Sharpness English T here are many factory presets optimized for various types of im- ages. Use the or to select the item. Presentation: For computer or notebook. Bright: For bright room. Movie: For home theater. sRGB: For standard color. User: Memorize user’s settings. Adjust the brightness of the image. Press the to darken image. Press the to lighten the image. T he contrast controls the degree of difference between the lightest and darkest parts of the picture. Press the to decrease the contrast. Press the to increase the contrast. Adjust the sharpness of the image. Press the to decrease the sharpness. ... - Page 23 Saturation Adjust a video image from black and white to fully saturated color. Press the to decrease the amount of color in the image. Press the “Sharpness”, Tint “Saturation” and “Tint” Adjust the color balance of red and green. functions are only supported under Video Press the to increase the amount of green in the image. mode. Press the to increase the amount of red in the image. User Controls to increase the amount of color in the image. English English...
-
Page 24: Image | Advanced
User Controls BrilliantColor Color Temp. When you adjust the values in the color adjust menu, the user mode Color Space Red Green Blue English IMAGE | Advanced P roduces an expanded onscreen color spectrum that delivers en- hanced color saturation for bright, true-to-life images. T he screen appears cooler at higher color temperatures and warmer at lower color temperatures. is activated. The values are saved in the user mode. S elect an appropriate color matrix type from RGB, YCbCr or YPbPr. U se the setting for advanced adjustment of the individual red color. Use the setting for advanced adjustment of the individual green color. U se the setting for advanced adjustment of the individual blue color. -
Page 25: Image | Advanced | Input Source
Input Use this option to enable / disable input sources. Press the sub menu and select which sources you require. Press “OK” to finalize the selection. The projector will not search for inputs that are not selected. User Controls IMAGE | Advanced | Input Source to enter English English... -
Page 26: Screen
User Controls Aspect Ratio D. zoom H Image Shift Shift the projected image position horizontally. V Image Shift Shift the projected image position vertically. V Keystone P ress the or to adjust image distortion vertically and makes a English Use this function to choose your desired aspect ratio. 4:3: This format is for 4×3 input sources not enhanced for Wide- screen TV. 1 6:9: This format is for 16×9 input sources, like HDTV and DVD enhanced for Wide screen TV. Native: This format displays the original image without any scal - ing. Adjust the size of projector’s display area. Press the to reduce the size of an image on the projection screen. Press the to magnify an image on the projection screen. rectangular image. SCREEN... - Page 27 How 3D Works * 3D technology takes advantage of the difference in angular vision between our two eyes to allow us to see images in three dimensions. How to watch 3D video 1. Y ou can watch 3D videos through your PC or DVD player. For PC, use the 3D video player in a computer equipped with a graphics card (Quad buffer feature) that has a quad buffer feature capable of outputting 120Hz vertical frequency. 2. T here can be a difference in resolution of 3D video images depend- ing on the capacity of the graphics card. The supported resolutions are shown below. For DVD player, please select 3D disk. RGBPC Signals Resolution SVGA 800x600 1024x768 3. Select “3D function On” from the projector menu. 4. Y ou can use the L/R function on the menu, to switch the video dis- play from left to right and vice versa. Choose the one that works for you. Please note the following facts. A fter you have turned the glasses on, the left and right video im- ages may overlap to start with. Please allow a short time for the device to optimize. When you watch the 3D video images under a fluorescent light ...
- Page 28 User Controls Things to remember when watching 3D videos - I f you exceed the recommended angle or distance, you may not - A viewer may perceive 3D images as being real and may be- - A viewer may make a sudden movement after mistaking a 3D - R est for 5 to 15 minutes after one hour of viewing 3D video. - I f your sight is different for each of your eyes, please correct - A djust your eye level to the 3D screen height and watch from - I f you experience a headache, exhaustion or dizziness, please - R efrain from watching 3D video for a prolonged time if you English P lease watch 3D videos within the recommended angle and dis- tance from the screen. (Recommended Distance: 1.5m~5m.)
-
Page 29: Setting | Language
Language C hoose the multilingual OSD. Press use the or or or key to select your preferred language. Press “OK” to finalize the selection. User Controls SETTING | Language into the sub menu and then English English... -
Page 30: Setting
User Controls Mounting English Front-Desktop T he factory default setting. The image is projected straight on the screen. Rear-Desktop W hen you select this function, the projector reverses the image so you can project behind a translucent screen. Front-Ceiling W hen you select this function, the projector turns the image upside down for ceiling-mounted projection. Rear-Ceiling W hen you select this function, the projector reverses and turns the image upside down at same time. You can project from be- hind a translucent screen with ceiling mounted projection. SETTING... - Page 31 Menu Location C hoose the menu location on the display screen. Mute Choose “On” to mute the volume. Choose “Off” to restore the volume. Alert Volume Allows you to set buzzer alert loudness (Off, Low, Medium or High) for power on/off, warning and command keys. Volume Press the to decrease the volume. Press the to increase the volume. Projector ID ID definition can be set up by menu (range 0~99), and allow user control an individual projector by RS232C. User Controls English English...
-
Page 32: Setting | Network
User Controls DHCP Address IP Address Subnet Mask Gateway DNS Apply English On: Assign an IP address to the projector from an external DHCP server automatically. Off: Assign an IP address manually. Select an IP address. Select subnet mask number. Select the default gateway of the network connected to the projector. Select DNS number. Press “ ” to save the changes made in network confi guration settings. SETTING | Network... -
Page 33: Setting | Signal
Fine Sync Change the display data frequency to match the frequency of your computer’s graphic card. Use this function only if the image appears to flicker vertically. “Signal” is only supported in Analog Total Dots VGA (RGB) signal. Synchronize the signal timing of the display with the graphic card. If the image appears to be unstable or flickers, use this function to correct it. H. Position (Horizontal Position) Press the to move the image left. Press the to move the image right. V. Position (Vertical Position) Press the to move the image down. Press the to move the image up. User Controls SETTING | Signal English... -
Page 34: Setting | Advanced
User Controls Logo Screen Capture Reset English SETTING | Advanced Use this function to set the desired startup screen. If changes are made they will take effect the next time the projector is powered Off: No logo is displayed. Normal: LG startup screen. Capture Screen: Use memorize from “Screen Capture” function. Press “ ” to immediately capture an image of the picture currently displayed on screen. Press “ ” to delete the captured picture and set back to the default setting. -
Page 35: Options
Input Search When “On” is selected, the projector will search for other signals if the current input signal is lost. When “Off” is selected, the projector will only search a specified connection port. High Altitude When “On” is selected, the fans will spin faster. This feature is use- ful in high altitude areas where the air is thin. Background Use this feature to display a “Logo”, “Black”, “Red”, “Blue”, “Green”, “White”, “Gray” or “Capture Screen” screen when no signal is available. Menu Lock Choose “On” to enable Menu Lock and hide the OSD menu. Choose “Off” to disable the Menu Lock. If you want to disable the Menu Lock function and have the OSD disappear, press the Menu button on the control panel for 15 seconds, then disable the function. User Controls OPTIONS English English... - Page 36 User Controls Closed Caption “Closed Caption” option is available for Factory Reset NTSC only. English Select an appropriate closed captions option: CC1, CC2, CC3, and CC4. Press “ ” to reset all settings to its factory default, the warning message below appears.
-
Page 37: Options | Lamp Settings
Lamp Counter (Normal) Display the projection time of normal mode. Lamp Counter (ECO) Display the projection time of ECO mode. Lamp Mode ECO: C hoose “ECO” to dim the projector lamp which will lower power consumption and extend the lamp life. Normal: Choose “Normal” to increase the brightness. Lamp Counter Reset Reset the lamp hour counter after replacing the lamp. User Controls OPTIONS | Lamp Settings English English... -
Page 38: Options | Security Setting
User Controls Password Change Password English OPTIONS | Security Setting On: Choose “On” to use password verification when the turning on the projector. Off: Choose “Off” to be able to switch on the projector without password verification. 1. Press “ ” to set the password. 2. The password has to be 4 digits. 3. Key in the original password, then enter the new password and confirm the new password again. -
Page 39: Options | Advanced
Standby RGB Output Choose “On” or “Off” the RGB output function at projector standby status. Default is Off. Wake On Lan Choose “On” or “Off” the Network function at projector standby status. Default is Off. Direct Power On Choose “On” to activate Direct Power mode. The projector will automatically power on when AC power is supplied, without pressing the “POWER” key on the projector control panel or “POWER” key on the remote control. Auto Power Off Use this function to activate power settings. By default, the projector is set to enter auto power off mode after 120 minutes of no activity. A warning message appears on screen showing a 60-second countdown before switching to auto power off mode. Press any button during countdown period to stop auto power off mode. Auto power off can be set to 30, 60, 90 or 120 minutes. If an input signal is not detected within two hours during auto power off mode, the projector switches from auto power off mode to power off mode. Quick Shutdown Choose “On” to turn off the projector with a single press of the power button. This function allows the projector to quick power off with an accelerated fan speed. User Controls OPTIONS | Advanced English English... -
Page 40: Information
User Controls INFORMATION BW286-SD Model Name Input Source All functions in Information display the status of the projector only. Resolution Operating Hour Lamp Voltage English BX286-SD Display the model name. Display the input connector type. Display the current display resolution. Display the operation hours. Display the Lamp Voltage. -
Page 41: Lan Module User's Guide
Lan Module User’s Guide Preface LAN module is a connection bridge between a projector and a district network. And via network, PC users can process remote control with projectors and received information from projectors. Definition of Terms Projector RS232C Command: A separated projector can execute command received from RS232C interface. RS232C interface of a projector must be configured as network feature but not other functions. LAN module: With its RS232C interface connected to pro- jector, and its RJ45 interface connected to network, LAN module can then communicate with both. LAN module firmware is written for this job. PC clients: Webpage control and Application can be used to process remote control. Network Connection Ethernet LAN and 802.3 LAN are both supported by this Default configura- ... -
Page 42: Webpage Operations
User Controls Webpage Operations Login Before login the web server, please get the IP address from projector OSD Menu. Key in the IP address projector acquired. A password is needed to login before can do any other work. Default passwords of two users are: Administrator: “admin” User: “user” Quote not included and capital sensitive. Network Setting and Alert Setting page After login, control pages will appear, i.e. Home, Control will NOT appear if Panel, Network Setting, Alert Setting, and Logout. User account is used. Home page is automatically selected after login. English • Select a user. Administrator is with high authority that can process more operations such as network setting and alert setting. And User is with normal authority. • Click Login button to login. There will be a prompt if your password is wrong. With correct password, you can enter to control pages. -
Page 43: Projector Control Panel
Home This is Home page which shows basic information of your projector. There is no control on this page. Information on this page will be updated every time this page begins to show. Projector Control Panel This page shows many controls of your projector. And it will show current status of your projector. Information on this page will be updated every time this page begins to show and 5 seconds after last but- ton clicked if a serial of actions performed. User Controls English English... -
Page 44: Network Setting
User Controls Network Setting 1. After Network configurations are changed, LAN module may reboot and there will be a moment before runs normally. 2. Information on this page will be updated every time Group Name and projector Name must be less then 32 char- this page begins to acters. Strings will be truncated if it is too long. show. Alert Setting 1. Information on this page will be updated every time this page begins to show. 2. Please submit set- tings before process test. Email will be sent whose body text informs the events which conditions occurred. Logout This page will appear for 5 seconds and then jump to login page English... -
Page 45: Appendices
Troubleshooting I f you experience trouble with the projector, refer to the following information. If the problem persists, please contact your local dealer or service center. Problem: No image appears on screen Ensure all the cables and power connections are correctly and securely connected as described in the “Installation” section. Ensure the pins of connectors are not crooked or broken. Check if the projection lamp has been securely installed. Please refer to the “Replacing the lamp” section. Make sure you have removed the lens cap and the projector is switched on. Ensure that the “AV Mute” feature is not turned on. Problem: Partial, scrolling or incorrectly displayed image Press “ Auto” on the remote control or on the control panel. If you are using a PC: For Windows 95, 98, 2000, XP: 1. F rom the “My Computer” icon, open the “Control Panel” folder, and double click the “Display” icon. - Page 46 Appendices Problem: The screen of the Notebook or PowerBook com- puter is not displaying a presentation English 4. V erify the resolution setting is less than or equal to 1600 x 1200 resolution. 5. S elect the “Change” under the “Monitor” tab . 6. C lick on “Show all devices”. Next, select “Standard monitor types” under the SP box; choose the resolution mode you need under the “Models” box. If you are using a Notebook: 1. F irst, follow the steps above to adjust resolution of the com- puter.
- Page 47 Problem: Image is unstable or flickering Adjust the “ Total Dots” or “Fine Sync” to correct it. Refer to the “SETTING|signal” section for more information. Change the monitor color setting from your computer . Check and reconfigure the display mode of your graphic card to make it compatible with the product. Problem: Image is out of focus Adjust the focus ing on the projector lens. M ake sure the projection screen is between the required distance 1.3 to 32.8 feet (0.4 to 10.0 meters) pages 19~20). Problem: The image is stretched when displaying 16:9 DVD T he projector automatically detects 16:9 DVD and adjusts the aspect ratio by digitizing to full screen with 4:3 default setting.
- Page 48 Appendices Problem: Lamp burns out or makes a popping sound Problem: LED lighting message Message Standby (Input power cable) Normal (Power on) Powering up (Warming up) Power off (Cooling-I: It can’t ac- cept any key at this status) Power off (Cooling-II: It can accept power key to turn on the projector) Error (Lamp failed) Error (Fan lock) Error (Over temp.) Steady light => No light => English W hen the lamp reaches its end of life, it will burn out and may make a loud popping sound. If this happens, the projector will not turn on until the lamp module has been replaced. To replace the lamp, follow the procedures in the “Replacing the Lamp”. POWER-LED (Green) (Orange) Flashing Flashing Flashing LAMP-LED TEMP-LED...
- Page 49 Problem: Message Reminders Over temperature - the projector has exceeded its recommended operating temperature and must be allowed to cool down before it may be used. Replacing the lamp - the lamp is about to reach its maximum life- time. Prepare to replace it soon. Fan failed - the system fan is not working. Appendices English English...
-
Page 50: Replacing The Lamp
Appendices Replacing the lamp The projector will detect the lamp life itself. It will show you a warning message Warning: Lamp com- When you see this message, please contact your local reseller partment may be hot! or service center to change the lamp as soon as possible. Make Allow it to cool down sure the projector has been cooled down for at least 45 min- before changing the utes before changing the lamp. lamp! Warning: To reduce the risk of personal injury, do not drop the lamp module or touch the lamp bulb. The bulb may shatter and cause injury if it is dropped. Lamp Replacing Procedure: 1. S witch off the power to the projector by pressing the “POWER”. 2. Allow the projector to cool down at least 45 minutes. 3. Disconnect the power cable. 4. Use a screwdriver to remove the 2 screws from the cover. 5. Push up and remove the cover. 6. R emove the 2 screws from the lamp module and pull up the lamp bar. 7. Pull out the lamp module by force. ... -
Page 51: Compatibility Mode
Compatibility Mode Computer Compatibility (Analog) Modes “*” compressed computer image. If projector does not support the input signal, ”Out of display range” message ap- WXGA pears on the screen. If the input signal is not in the compat- ibility table, the image may not be displayed clearly. SXGA+ MAC LC 13” MAC II 13” MAC 16” MAC 19” MAC G4 i Mac DV i Mac DV i Mac DV Appendices Resolution 640 x 350 640 x 350 640 x 400 640 x 480 640 x 480 640 x 480 640 x 480 720 x 400 720 x 400 SVGA 800 x 600 800 x 600 800 x 600... -
Page 52: Computer Compatibility (Hdmi)
Appendices English Computer Compatibility (HDMI) HDMI - PC Signal Modes Resolution 640 x 480 640 x 480 640 x 480 640 x 480 SVGA 800 x 600 800 x 600 800 x 600 800 x 600 800 x 600 800 x 600 1024 x 768 1024 x 768 1024 x 768 1024 x 768 SXGA 1152 x 864 1152 x 864 1280 x 1024 1280 x 1024 1280 x 1024 1280 x 960 PowerBook G4 640 x 480 PowerBook G4 640 x 480 PowerBook G4 800 x 600 PowerBook G4 1024 x 768 PowerBook G4... - Page 53 HDMI - Extended Wide timing Modes WXGA “*” Only support 1080P@60Hz (with reduced blanking tim- ing). HDMI - Video Signal Modes Appendices Resolution 1280 x 768 1280 x 768 1280 x 768 1280 x 720 1280 x 800 1440 x 900 1680 x 1050 1366 x 768 *1920 x 1080-RB Resolution 480i 720 x 480(1440 x 480) 480p 720 x 480 576i 720 x 576(1440 x 576) 576p 720 x 576 720p 1280 x 720 720p 1280 x 720 1080i...
-
Page 54: Configurations Of Terminals
Appendices Configurations of Terminals English Terminal : Analog RGB (Mini D-sub 15 pin) Red (R/Cr) Input/R Output Green (G/Y) Input/G Output Blue (B/Cb) Input/B Output Ground (Horiz.sync.) Ground (Red) Ground (Green) Ground (Blue) Terminal : Mini DIN 3-pin 5V / *** Ground (Ver. sync.) ICP download DDC data / *** Horiz. sync. Input / Output (Composite H/V sync. Input) Vert. sync. Input / Output DDC clock / ***... -
Page 55: Rs232 Command Table
RS232 Command Table LG BX286-SD RS232 Command Table --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Baud Rate : 9600 Data Bits: 8 Parity: None Stop Bits: 1 Flow Control : None UART16550 FIFO: Disable Projector Return (Pass): P Projector Return (Fail): F --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- SEND to projector --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Function 232 ASCII Code HEX Code --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- ~XX00 1 7E 30 30 30 30 20 31 0D Power ON ~XX00 0 7E 30 30 30 30 20 30 0D Power OFF ~XX00 1 ~nnnn 7 E 30 30 30 30 20 31 20 a 0D Power ON with Password ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------... - Page 56 Video/Video/HDMI1 data[15] : Aspect Ratio 0/1/2=4:3/16:9/Native data[16] : Display mode 0/1/2/3/4/5/6/7/8=None/Presentation /Bright/Movie/sRGB/ Customer data[17] :Colour temperature 0/1/2/=low/med/high data[18] :NA 0 data[19] :Projection 0/1/2/3=front/front-ceiling/rear/rear- ceiling. data[20] :Logo 0/1=LG Logo/Screen Capture data[21] : Background Color 0/1/2/3/4/5/6/7=Logo/Capture Screen /Black/Red/Blue/Green/White/Gray data[22] : Color Space 0/1/2= RGB /Ycbcr/Ypbpr data[23..24] : Projector ID XX data[25..26] : Volume XX data[27..28] : Sharpness XX data[29..30] : Phase XX data[31..32] : BrilliantColor XX data[33..34] : Zoom XX (zoom 0~20 ) data[35..37] : Brightness XXX data[38..40] : Contrast XXX data[41..43] : V Image Position XXX data[44..46] : Ver. keystone XXX data[47..49] : Auto Power Off XXX data[50..52] : NA 000 data[53]: Closed Captioning 0/1/2/3/4=Off/cc1/cc2/cc3/cc4 data[54]: NA 0 data[55]: 3D 0/1=off/on data[56]: 3D Sync Invert 0/1=off/on...
-
Page 57: Dimensions
Appendices Dimensions LENS CENTER 305.88 14.30 98.47 124.50 14.55 72.35 121.30 Screw holes for ceiling mount Screw M3 Depth: 7.0 mm 55.00 55.00 Unit: mm 131.53 174.35 English English... -
Page 58: Regulation & Safety Notices
Appendices Regulation & Safety Notices This appendix lists the general notices of your projector. FCC notice This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures: English • Reorient or relocate the receiving antenna. • Increase the separation between the device and receiver. • Connect the device into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/television technician for help. Notice: Shielded cables All connections to other computing devices must be made using shielded cables to maintain compliance with FCC regulations. Caution Changes or modifications not expressly approved by the manufacturer could void the user’s authority, which is granted by the Federal Communications Commission, to operate this projector. -
Page 59: Operation Conditions
Operation conditions This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference and 2. This device must accept any interference received, including interference that may cause undesired operation. Notice: Canadian users This Class B digital apparatus complies with Canadian ICES-003. Remarque à l’intention des utilisateurs canadiens Cet appareil numerique de la classe B est conforme a la norme NMB-003 du Canada. Declaration of Conformity for EU countries • EMC Directive 2004/108/EC (including amendments) • Low Voltage Directive 2006/95/EC • R & TTE Directive 1999/5/EC (if product has RF function) Disposal instructions Do not throw this electronic device into the trash when discarding.
Need help?
Do you have a question about the BW286 and is the answer not in the manual?
Questions and answers