LG BX220-JD Owner's Manual

Lg dlp projector owner's manual.
Hide thumbs
Please read this manual carefully before operating
your set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached on the bottom of the set and
quote this information to your dealer when you
require service.
Model number
Serial number


   Related Manuals for LG BX220-JD

   Summary of Contents for LG BX220-JD

  • Page 1

    Retain it for future reference. Record model number and serial number of the set. See the label attached on the bottom of the set and quote this information to your dealer when you require service. Model number Serial number BX220-JD OWNER’S MANUAL...

  • Page 2

    DLP PROJECTOR DLP PROJECTOR FCC NOTICE • A Class A digital device This equipment has been tested and found to comply with the limits for a Class A digital device, pur- suant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.

  • Page 3: Table Of Contents

    Projector Status Indicators...10 Accessories...11 Optional Extras ...11 Installing and Composition Installation Instructions ...12 Basic Operation of the Projector...13 Using Kensington Security System...14 Turning on the Projector ...15 Turning off the Projector ...15 Focus and Position of the Screen Image...16 Selecting source mode ...16 Connection Connecting to a Desktop PC ...17...

  • Page 4: Safety Instructions

    Outdoor Installation Do not use the projector in a damp place such as a bathroom where it is likely to get wet. This may cause a fire or an electric shock hazard ! Power Earth wire should be connected.

  • Page 5

    This may cause a fire or an electric shock hazard ! Do not turn the projector On/Off by plugging-in or unplugging the power plug to the wall outlet. (Do not use the power plug for switch.) It may cause mechanical failure or could give an electric shock.

  • Page 6

    Others Do not attempt to service the projector yourself. Contact your dealer or service centre. This may cause damage to the projector and could give an electric Shock as well as invalidating the warranty ! Others Be sure to unplug if the projector...

  • Page 7: Main Body, Connecting Part

    Names of parts Main Body * The projector is manufactured using high-precision technology. You may, however, see on the Projector screen tiny black points and/or bright points (red, blue, or green). This can be a normal result of the manufacturing process and does not always indicate a malfunction.

  • Page 8: Control Panel

    Names of parts Control Panel MENU Button Selects or closes menus. AUTO Button POWER Button , KEYSTONE+/- Button MENU SOURCE KEYSTONE SOURCE Button Switches to RGB, DVI, Video,S-Video mode. Adjusts functions of menus. KEYSTONE Checks present mode and AUTO saves the change of functions. POWER Button OK Button...

  • Page 9: Remote Control, Installing Batteries

    Remote Control POWER Button MENU Button Button AUTO Button (Refer to p.25) BLANK Button (Refer to p.23) Installing Batteries • Open the battery compartment cover on the back of the remote control and insert the batteries with correct polarity, match “+” with “+”, and match “-” with “-”. •...

  • Page 10: Projector Status Indicators

    Names of parts Projector Status Indicators * Lamp Indicator, operation indicator and temperature indicator at the top of the projector show the user the operating status of the projector. Orange Green(flashing) Operation Indicator Green Orange(flashing) Lamp Indicator Red(flashing) Green(flashing) Orange...

  • Page 11: Accessories, Optional Extras

    * When applying a ceiling installer, use only the ceiling installer for projector. * Contact your service personnel for replacing a new lamp. * Projector lamp is reaching the end of its life and needs to be replaced with a new lamp. Projection Screen...

  • Page 12: Installation Instructions

    Don’t place the projector where it can be covered with dust. This may cause overheating of the projector. Do not obstruct the slots and openings of the projector. This may cause overheating and create a fire hazard. The projector is manufactured using high-precision technology. You may, however, see tiny black points and/or bright points (red, blue, or green) that continuously appear on the projector Screen.

  • Page 13: Basic Operation Of The Projector

    3.Position the projector so that the lens is set at a right angle to the screen. If the projector is not set at a right angle, the screen image will be crooked. If this is so then the keystone adjustment may correct this (Refer to page 22.)

  • Page 14: Using Kensington Security System

    Installing and Composition Using Kensington Security System G The projector has a ‘Kensington’ Security System Connector on the back panel. Connect the ‘Kensington’ Security system cable as below. G For the detailed installation and use of the Kensington Security System, refer to the user’s guide attached to the Kensington Security System set.

  • Page 15: Turning On The Projector, Turning Off The Projector

    (Green operation indicator flashes during cooling of the lamp.) G It will take about 12 second to display the picture after power on because the projector lamp has to warm up. G An image will appear after the operation indicator light turns (Green).

  • Page 16: Focus And Position Of The Screen Image, Selecting Source Mode

    1. While pressing the foot adjuster button, raise or lower the projector to place the screen image in the proper position. 2. Release the button to lock the foot in its new position.

  • Page 17: Connecting To A Desktop Pc, Connecting To A Notebook Pc

    Connecting to a Desktop PC * You can connect the projector to a computer of VGA, SVGA, XGA and SXGA output. * You can use ARC function for the RGB signals of the Aspect Ration 4:3. (For HD wide input signals, you cannot use ARC function.) * Fundamentally, HD wide input signal is not included in the Spec, so the set may not support HD signal perfectly.

  • Page 18: Connecting To A Video Source, Connecting To A Dvd, Connecting To A D-tv Set-top Box

    Connection Connecting to a Video Source * You can connect a VTR, a camcorder, a LDP or any other compatible video image source to the projector. < How to connect 1 > a. Connect the Video input jacks of the projector to the output jacks of the A/V source with Video cable.

  • Page 19: Adjusting Video, Apc (auto Picture Control)

    Function * In this manual, the OSD(On Screen Display) may be different from your Projector’s because it is just example to help with the Projector operation. * If there is no input signal present, the Menu will not be displayed on the screen.

  • Page 20: Auto Color Temperature Control, White Peaking Function, Gamma Function

    Function Video Menu Options Auto Color Temperature Control 1. Press the MENU button and then use 2. Press the OK ( ) button and then use 3. Press the button to make appropriate adjustments. F, G Each press of the button changes the screen as shown below.

  • Page 21: Selecting Language, Flip Horizontal Function, Flip Vertical Function

    Flip Vertical Function * This function reverses the projected image vertically. * When you hang the projector upside down from the ceiling , you will need to reverse the image vertically and horizontally. 1. Press the MENU button and then use 2.

  • Page 22: Using Arc Function, Using Keystone Function, Auto Source Function

    Using Keystone function * Use this function when the screen is not at a right angle to the projector and the image is a trapezoid shape. * Only use the Keystone function when you can’t get the best angle of projection, because it may cause a blazing fire of the screen.

  • Page 23: Using Blank Function, Selecting Blank Image Color, Lamp Mode Function

    Using Blank function * This function may be effective if you need to get attention of the audience during presentations, meetings or briefings. 1. Press the BLANK button. The screen turns off to a background color. You can choose the background color. (Refer to ‘Selecting blank image color’) 2.

  • Page 24: Checking Lamp Time, Using Still Function

    1. Press the MENU button and then use G The used lamp time is displayed. G When projector lamp is reaching the end of its life (over 2000 hours), the lamp indicator will be turned red. G The lamp warning LED illuminates red continuously in the case of excessive lamp time.

  • Page 25: Auto Tracking Function, Clock / Phase Function, Screen Position

    Screen Menu Options Auto Tracking Function *This function assures you of getting the best video quality by automatically adjusting the difference of horizontal size and synchronization of the image. *Auto Tracking function works in RGB input only. 1. Press the AUTO button. Image positioning and synchronization are automatically adjusted.

  • Page 26: External Control Device Setup

    To exit the menu display, repeatedly, press the MENU button. How to connect external control equipment • Connect the serial port of the PC to the RS-232C jack on the projector back panel. • RS-232C cable is not supplied with the projector.

  • Page 27: Communication Protocol

    [Command2] [ ] [Set ID] [ ] [OK] [Data] [x] * The Projector transmits ACK (acknowledgement) based on this format when receiving normal data. At this time, if the data is data read mode, it indicates present status data. If the data is data write mode, it returns the data of the PC computer.

  • Page 28

    RS-232C External control device setup 01. Power (Command2:a) ➜ To control Power On/Off of the Projector. Transmission [k] [a] [ ] [Set ID] [ ] [Data] [Cr] Data 0 : Power Off 1 : Power On [a] [ ] [Set ID] [ ] [OK] [Data] [x]...

  • Page 29

    1 : OSD Select Mode On 11. Remote Control Lock/Key Lock (Command2:m) ➜ To lock the front panel controls on the projector and remote control. Transmission [k] [m] [ ] [Set ID] [ ] [Data] [Cr] Data 0 : Lock Off...

  • Page 30

    [z] [ ] [Set ID] [ ] [OK] [Data] [x] Data Min : 0 ~ Max : 64 16. Low Power (Command2:q) ➜ To reduce the power consumption of the projector. Transmission [ j ] [q] [ ] [Set ID] [ ] [Data] [Cr] Data...

  • Page 31: Supported Monitor Display

    1280X1024 60.020Hz * If the projector does not support the input signal, “Out of Range” message appears on the screen. * The projector supports DDC1/2B type as Plug & Play function. (Auto recognition of PC monitor) * The Synchronization input form for horizontal and vertical frequencies are Separate, Composite and SOG.

  • Page 32: Maintenance

    Cleaning the Projector Case To clean the projector case, first unplug the power cable. To remove dirt or dust, wipe the casing with a soft, dry, lint-free cloth. To remove stubborn dirt or stains, moisten a soft cloth with water and a neutral detergent and then wipe the casing.

  • Page 33: Memo

    Information Memo...

  • Page 34

    Information Memo...

  • Page 35: Specifications

    In operation : 32~104°F(0°C~40°C) In storage and transit : -4~140°F(-20°C~60°C) humidity In operation : 0~ 80% relative humidity by dry hygrometer Not in operation : 0 ~ 90% relative humidity by dry hygrometer BX220-JD 1024(Horizontal) x 768(Vertical)pixel 4:3(horizontal:vertical) 0.55 inches 1.01~5.08m(40~200 inches) 1:1.2...

This manual also for:

Bx220, Rd-jt90

Comments to this Manuals

Symbols: 0
Latest comments: