IMG STAGELINE PARC-150ZOOM Instruction Manual page 7

R.000
G.000
STAT B.000
ST.00
F.000
AT
AUTO
PR
MOD1
SOUD
MOD2
RUN DMX and SLAV mode for selection
DMX
Adjust DMX value from 001 to 512
STAG
ARC.1
PERS
AR1.d
AR1.S
HSV.
ID01 to ID66 to set different fixture
ID
TEMP CURR
PR.01 to PR.10 to set 10 programmer
SC.01 to SC.30 to set 30 different sense
R.000
G.000
EDIT
B.000
ST.00
T.000
F.000
M.000
UPLD
REST
ID
SET
RGB
POW
DIM
White balance adjustment
WT01 to WT.11 to adjust R/G/B from 0~255
CAL 1
Ps: when run STAG mode, channel 5 can show 11 different white color
RGB adjust correct color for RGB
CAL 2
RGB adjust from 25~255
Master/slave mode (auto-running,sound control)
This mode will allow you to link up 32 units together without a controller.
Use standard DMX cables to daisy chain your units together via the DMX connector on the rear of the units.
For proper performance it may be necessary to use a terminator at the last fixture.
Adjust red color from 0~255
Adjust green color from 0~255
Adjust blue color from 0~255
Adjust strobe effect from 0~20
Adjust electronic zoom
From AT01 to AT10 with 10 different auto mode in zoom
From PR01 to PR10 with 10 different mode in zoom
Sound control with color change in zoom
Sound control with color strobe in zoom
Run stage mode ,12 channel with details on dmx protocol
Run 3 channel mode Red/Green/Blue
Run 4 channel mode Dimmer/Red/Green/Blue
Run 5 channel mode Dimmer/Red/Green/Blue/Strobe
Adjust Color in Hue (0~255),Saturation (0~255)and Value (0~255)
show current fixture temperature
Adjust red color from 0~255
Adjust green color from 0~255
Adjust blue color from 0~255
Adjust strobe effect from 0~20
Adjust from 0~255
Adjust from 0~255
Adjust electronic zoom
sending data to next fixture with self-built in program
reset fixture
OFF/ON
OFF/ON
HIGH/NORM select different power consumption with HIGH 100% and Norm 33%
OFF/DIM1/DIM2/DIM3/DIM4
6