Canon PIXMA TS9550 Online Manual page 308

1. Make sure any original has been removed from platen.
2. Open document tray (A).
3. Slide the paper guides (B) all the way out.
4. Load document with side to scan facing up in document tray.
Insert the document until it stops.
5. Adjust document guide (B) to match width of document.
Do not slide the document guide too hard against the document. The document may not be fed
properly.
Note
• When scanning duplex documents, place the front sides facing up. They will not be scanned correctly
if placed the other way around.
Placing Items (When Using Stand)
1. Place item on platen.
1. Open the document cover.
308