Table of Contents
Advertisement
1)
Press as to select [ASPECT].
2)
Press qw or the <ENTER> button.
f The [ASPECT] individual adjustment screen is displayed.
3)
Press qw to switch the item.
f The items will switch each time you press the button.
[NORMAL]
[FULL]
Note
f If an aspect ratio which is different from the aspect ratio for the input signals is selected, the images will appear differently from the originals.
Be careful of this when selecting the aspect ratio.
f If using the projector in places such as cafes or hotels to display programs for a commercial purpose or for public presentation, note that
adjusting the aspect ratio or using the zoom function to change the screen images may be an infringement of the rights of the original
copyright owner for that program under copyright protection laws. Be aware when you use the aspect ratio adjustment function of the
projector.
f [FULL] may not be allowed to select for some signals.
f The setting of [ASPECT] is not reflected in internal test patterns (x page 91).
[KEYSTONE]
Correct keystone distortion that occurs when the projector main unit (projection lens surface) does not directly
face the projection surface.
Setting [HV CORRECTION]
1)
Press as to select [KEYSTONE].
2)
Press the <ENTER> button.
3)
Press as to select [HV CORRECTION].
4)
Press the <ENTER> button.
f The [HV CORRECTION] individual adjustment screen is displayed.
5)
Press asqw to adjust.
[VERTICAL]
Setting [CORNER CORRECTION]
1)
Press as to select [KEYSTONE].
2)
Press the <ENTER> button.
3)
Press as to select [CORNER CORRECTION].
4)
Press the <ENTER> button.
f The [CORNER CORRECTION] screen is displayed.
5)
Press as to select the item to adjust, and press the <ENTER> button.
f The [CORNER CORRECTION] individual adjustment screen ([UPPER LEFT], [UPPER RIGHT], [LOWER
LEFT], or [LOWER RIGHT]) is displayed.
6)
Press asqw to adjust.
Chapter 4 Settings — [SETUP] menu
Displays images without changing the aspect ratio of the input signals.
Displays images in the entire screen range. When the aspect ratio of the input signal differs from that
of the screen range, the images are displayed with the input signal converted to the aspect ratio of
the screen.
[HV CORRECTION]
[HORIZONTAL]
ENGLISH - 69
Advertisement
Table of Contents
