Table of Contents
Advertisement
1)
Press as to select [Art-Net].
2)
Press qw to switch the item.
f The items will switch each time you press the button.
[OFF]
[WIRED LAN]
[WIRELESS LAN]
Note
f Refer to "Setting address for [WIRED LAN]" (x page 84) or "Setting address for [WIRELESS LAN]" (x page 85) for how to set the IP
address.
f If [Art-Net] is set to other than [OFF], the [NETWORK] menu → [WIRED LAN] (x page 77) or [WIRELESS LAN] (x page 78) is
disabled.
f If the string of SSID exceeds 16 characters, the SSID is displayed in two lines.
Setting address for [WIRED LAN]
1)
Press as to select [Art-Net].
2)
Press qw to select [WIRED LAN].
3)
Press the <ENTER> button.
f The [Art-Net (WIRED LAN)] screen is displayed.
4)
Press as to select [DEVICE IP ADDRESS].
5)
Press qw to switch the item.
f The items will switch each time you press the button.
[2.x.x.x]
[10.x.x.x]
[MANUAL]
6)
Press as to select each item, and change the settings according to the operation instructions of the
menu.
[NET]
[SUB NET]
[UNIVERSE]
[START ADDRESS]
f When [2.x.x.x] or [10.x.x.x] is selected in Step 5), proceed to Step 8).
7)
Press as to select each item, and change the settings according to the operation instructions of the
menu.
[DHCP]
[IP ADDRESS]
[SUBNET MASK]
[DEFAULT GATEWAY]
[DNS1]
[DNS2]
8)
Press as to select [STORE], and press the <ENTER> button.
9)
When the confirmation screen is displayed, press qw to select [OK], and press the <ENTER> button.
Note
f When the network address is changed in the [NETWORK] menu → [WIRED LAN] (x page 77), the address is reflected in the address for
[MANUAL] of this [WIRED LAN] setting.
84 - ENGLISH
Chapter 4 Settings — [NETWORK] menu
Disables the Art-Net function.
Uses the Art-Net function with wired LAN connection.
Uses the Art-Net function with wireless LAN connection.
Sets the IP address to 2.x.x.x automatically.
Sets the IP address to 10.x.x.x automatically.
Sets the IP address manually.
Enter the net setting of the control console to be connected to the projector.
Enter the subnet setting of the control console to be connected to the projector.
Enter the universe setting of the control console to be connected to the projector.
Enter a start address where the projector processes Art-Net.
Set to [ON] when obtaining an IP address automatically using a DHCP server. Set to [OFF] when not
using a DHCP server.
Enter the IP address when not using a DHCP server.
Enter the subnet mask when not using a DHCP server.
Enter the default gateway address when not using a DHCP server.
Enter the primary DNS server address when not using a DHCP server.
Enter the secondary DNS server address when not using a DHCP server.
Advertisement
Table of Contents
