Quadratec Q9000 Synthetic Operator's Manual page 14

MOVING PARTS ENTANGLEMENT HAZARDS
NEVER leave remote control where it can be activated
during free spooling, rigging, or when the winch is not
being used.
NEVER leave the winch remote control plugged in when
installing, freespooling, rigging, servicing or when the
winch is not being used.
ALWAYS avoid side pulls which can pile up winch line
at one end of the drum.
This can damage the winch line or winch.
ALWAYS ensure the clutch is fully engaged
or disengaged.
ALWAYS use care to not damage the vehicle frame when
anchoring to a vehicle during a winching operation.
NEVER submerge winch in water.
ALWAYS store the remote control in a protected,
clean and dry area.
Finger/Fairlead
Crushing Hazard
14
MOVING PARTS ENTANGLEMENT
HAZARD LIST
AVOID WINCH AND
EQUIPMENT DAMAGE
Keep Fingers Clear of
Fairlead Pinch Point