Contents 1 Important 7 Product information Safety Specifications Notice 8 Troubleshooting 2 Your Spotify Multiroom Speaker Introduction 9 Appendix: Understand meanings What’s in the box of LED colors What else you need Overview of the main unit 3 Prepare Download SpeakerSet Multiroom Manager to your iOS or Android device 6 Connect power and switch on 4 Connect SW750M to your home...
WOOX Innovations may void the user’s product (e.g. liquid filled objects, lighted authority to operate the equipment. candles). Philips and the Philips’ Shield Emblem are • Where the mains plug or an appliance registered trademarks of Koninklijke Philips N.V. coupler is used as the disconnect device,...
Page 5
Environmental information All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet.) Your system consists of materials which can be recycled and reused if disassembled by a specialized company.
Philips offers, register your product premium account) apps available on at www.philips.com/welcome. Apple App Store (for iOS devices) If you contact Philips, you will be asked for the or Google Play Store (for Android model and serial number of this apparatus. The devices)
Overview of the main unit a b c e fg • Skip to the previous/next song. • Start or pause music play. c +/- • Adjust volume. d System status indicator • Show the current status of the speaker. e DC IN •...
3 Prepare On the initial setup page, tap Setup a new speaker. Always follow the instructions in this chapter in sequence. Download SpeakerSet Multiroom Manager to your iOS or Android device (For iPod touch/iPhone/iPad users) Install SpeakerSet from Apple App Store, and then run the app.
Page 9
» The system status indicator on the front panel blinks amber during boot- » If a Wi-Fi connection has been set up for the speaker, the system status indicator turns solid green after successful connection. • The speaker enters standby mode automatically after 15 minutes of inactivity.
4 Connect Before connection of SW750M to your home Wi-Fi network, make sure that: SW750M to a your Wi-Fi router is powered on and working properly. your home b the speaker has been powered on and Wi-Fi network booted up successfully. c (for option 1, 2 and 4 only) you have jotted down your Wi-Fi password.
Wi-Fi status indicator on the SETUP button turns solid amber. As instructed, exit the app, and then select :) Philips Setup from the list of available Wi-Fi networks. After automatic detection of the speaker successfully, open the SpeakerSet app again.
Tap Next on the above app screen, and Option 2: Set up through an then read how to proceed with network Android device setup. Select Wireless (WI-FI) under HOW DO YOU WANT TO CONNECT?. Before setup, make sure that your Android device is connected to your home Wi-Fi Select the name of your home Wi-Fi network.
Press the WPS button on your home Option 3: Set up wireless Wi-Fi router. connection to a WPS router directly As instructed on the app, press and hold WPS on the back of SW750M for more than 3 seconds. » The Wi-Fi status indicator on the WPS button blinks green.
» Both the system status indicator on the front panel and the Wi-Fi status indicator on the SETUP button turns solid amber. Select :) Philips Setup from the list of available Wi-Fi networks on your PC/Mac. After successful connection, open a web browser on your PC/Mac.
Page 15
Rename the speaker as you like. Tap Done to confirm.
Make sure that the speaker is connected to your home Wi-Fi network with Internet connection available. Switch to the Spotify app from SpeakerSet or open the Spotify app directly. Log in to your Spotify premium account. Select the speaker for music streaming. Username Password Philips SW750M xxxxxx...
Stream music to the speaker. Group and ungroup speakers During play, you can: • press on the speaker to pause/ Connect multiple Spotify Multiroom resume music play. Speakers to your home Wi-Fi network • press on the speaker to skip to (see ‘Connect SW750M to your home the previous/next song.
Page 18
Tick circles beside the speakers to add Tap the check mark at the top right on the them into the group. above app screen, and then wait for more than 10 seconds until the grouping finishes. Tap > beside the group name to enter the To ungroup speakers: edit page.
Page 19
To adjust volume of all speakers in a group at Enjoy music streamed to the group the same time: speakers Open the SpeakerSet app, then tap on the main page to enter the volume On the home page, tap the icon of the adjustment page.
Page 20
To adjust volume of an individual speaker: Press +/- on the top panel of the speaker. • • Open the SpeakerSet app, then move the slider beside the speaker on the above volume adjustment page directly. To play/pause music play: •...
6 Other features Tap Factory reset to enter the factory reset page. Restore factory settings In some cases, you may need to reset the speaker, for example, when you need to reset the Wi-Fi settings or log out from the current Spotify premium account.
Tap Firmwareupgrade to enter the Upgrade firmware firmware upgrade page. To improve the performance of SW750M, Philips may offer you new firmware for upgrade of your SW750M. Warning • Always connect your SW750M to AC power for firmware upgrade. Never power off your SW750M nor close the app during firmware upgrade.
(one button Note push) • Product information is subject to change without prior notice. General information AC power Model: TPA103- PHILIPS 30150-EU; input: 100 Specifications SWITCHING POWER - 240 V~, 50/60Hz, SUPPLY 1.1 A MAX.; output: Model: OH- Amplifier 1028E1502000U;...
If the problem remains unsolved, go to the Philips web site (www. How can I reconfigure the Wi-Fi settings? philips.com/welcome). When you contact •...
9 Appendix: 1 blinking amber In WPS quickly, and 3 blinking mode Understand green 1 solid green Network meanings of connection successful LED colors 1 blinking green During audio quickly buffering 1 blinking green Muted or slowly playback paused 1 dimmed by 50% in In standby solid green mode with...