Auto Standby; Set Display Brightness; Apply Factory Settings - Philips HTL3110B/05 Manual

•
An MP3 or WMA file on a USB
storage device
1
Connect a USB storage device to
this product.
2
Press USB on the remote control.
3
Use the remote control to control
play.
Button Action
Start, pause or resume play.
/ Skip to the previous or next
track.
USB
During USB play, press
repeatedly to select a repeat or
shuffle mode, or turn off a play
mode.
Note
•
This product supports WMA files which are
converted via Windows Media Player (WMA
files converted via other file format converters
may not work).
•
This product may not be compatible with
certain types of USB storage device.
•
If you use a USB extension cable, USB HUB, or
USB multi-reader, the USB storage device may
not be recognized.
•
Digital camera PTP and MTP protocols are not
supported.
•
Do not remove the USB storage device while it
is being read.
•
DRM-protected music files (MP3, WMA) are
not supported.
•
Support a USB port: 5V

Auto standby

When playing media from a connected
device, the SoundBar automatically
switches to standby after 29 minutes
of button inactivity and no audio/video
play from a connected device.
EN
12
, 1A.

Set display brightness

You can press DIM repeatedly to select
a different brightness level of the
display panel on this product.

Apply factory settings

You can reset this product to the default
settings programmed at the factory.
1
In any source mode, on the remote
control press Volume -, BASS -, and
TREBLE - in sequence within three
seconds.
» When the factory settings
restore is complete, the product
automatically switches off and
restarts.