Care For Your Product; Compliance; Care Of The Environment - Philips HTL3110B/05 Manual

2
Connect the brown wire to the
terminal marked L or colored red.
3
Do not connect either wire to the
earth terminal in the plug, marked E
(or e) or colored green (or green and
yellow).
Before you replace the plug cover, make
sure that the cord grip is clamped over
the sheath of the cable and not just over
the two wires in the cable.
Copyright in the U.K.
Recording and playback of material
may require consent. See Copyright Act
1956 and The Performer's Protection
Acts 1958 to 1972.

Care for your product

Use only microfiber cloth to clean the
product.

Compliance

This product complies with the radio
interference requirements of the
European Community.
Hereby, Gibson Innovations declares
that this product is in compliance with
the essential requirements and other
relevant provisions of Directive 1999/5/
EC. You can find the Declaration of
Conformity on www.p4c.philips.com.

Care of the environment

Disposal of your old product and
battery
Your product is designed and
manufactured with high quality
EN
4
materials and components, which can
be recycled and reused.
This symbol on a product means
that the product is covered by
European Directive 2012/19/EU.
This symbol means that the product
contains batteries covered by
European Directive 2013/56/EU
which cannot be disposed of with
normal household waste.
Inform yourself about the local separate
collection system for electrical and
electronic products and batteries.
Follow local rules and never dispose of
the product and batteries with normal
household waste. Correct disposal
of old products and batteries helps
prevent negative consequences for the
environment and human health.
Removing the disposable batteries
To remove the disposable batteries, see
battery installation section.