Table of Contents
Advertisement
1
Connect a USB storage device to this
product.
2
Press USB on the remote control.
3
Use the remote control to control play.
Button
Action
Start, pause or resume play.
/
Skip to the previous or next track.
USB
During USB play, press repeatedly to
select a repeat or shuffle mode, or
turn off a play mode.
Note
•
This product may not be compatible with certain types
of USB storage device.
•
If you use a USB extension cable, USB HUB, or USB
multi-reader, the USB storage device may not be
recognized.
•
Digital camera PTP and MTP protocols are not
supported.
•
Do not remove the USB storage device while it is
being read.
•
DRM-protected music files (MP3, WMA) are not
supported.
•
Support a USB port: 5V
Auto standby
When playing media from a connected device,
the SoundBar automatically switches to standby
after 29 minutes of button inactivity and no
audio/video play from a connected device.
Set display brightness
You can press DIM repeatedly to select a
different brightness level of the display panel on
this product.
EN
10
, 1A.
Apply factory settings
You can reset this product to the default
settings programmed at the factory.
1
In any source mode, within three seconds
press - (Volume), BASS - and TREBLE -.
» When the factory settings restore is
complete, the product automatically
switches off and restarts.
Advertisement
Table of Contents
