Play Music Via Bluetooth; Auto Standby; Apply Factory Settings - Philips SW2140 User Manual

Button Action
USB During play, press to toggle: repeat
one track and repeat off.
Repeat play indicator
• If repeat mode is turned on, all the
LED indicators light up for one
second, then the current source
indicator stays on.
• If repeat mode is turned off, all the
LED indicators light up, then light
off one by one. Finally the current
source indicator stays on.
Note
•
This product may not be compatible with certain types
of USB storage device.
•
If you use a USB extension cable, USB HUB, or USB
multi-reader, the USB storage device may not be
recognized.
•
Digital camera PTP and MTP protocols are not
supported.
•
Do not remove the USB storage device while it is
being read.
•
DRM-protected music files (MP3) are not supported.
•
Support a USB port: 5V , 1A.

Play music via Bluetooth

Through Bluetooth, connect your product with
a Bluetooth device (such as an iPad, iPhone,
iPod touch, Android phone, or laptop), and then
you can listen to the audio files stored on the
device through the speakers of this product.
What you need
• A Bluetooth device which supports
Bluetooth profile A2DP, and with Bluetooth
version as 4.1.
• The operational range between the
main unit and a Bluetooth device is
approximately 10 meters (30 feet).
1
Press on the remote control to switch
this product to Bluetooth mode.
» The indicator blinks.
EN
12
2
On the Bluetooth device, switch on
Bluetooth, search for and select PHILIPS
HTL2140 to start connection (see the
user manual of the Bluetooth device on
how to enable Bluetooth).
• When prompted for a password, enter
"0000".
» During connection, the indicator
blinks.
3
Wait until the indicator lights up.
» If the connection fails, the indicator
blinks continually.
4
Select and play audio files or music on
your Bluetooth device.
• During play, if a call is coming, music
play is paused. Play resumes when the
call ends (this feature is dependent on
the connected mobile phone).
• If your Bluetooth device supports
AVRCP profile, on the remote control
you can press / to skip to a track,
or press to pause/resume play.
5
To exit Bluetooth, select other source.
• When your switch back to Bluetooth
mode, Bluetooth connection remains
active.
Note
•
The music streaming may be interrupted by obstacles
between the device and this product, such as wall,
metallic casing that covers the device, or other devices
nearby that operate in the same frequency.
•
If you want to connect this product with another
Bluetooth device, press and hold on the remote
control to break the current Bluetooth connection.

Auto standby

When playing media from a connected device,
this product automatically switches to standby
after 15 minutes of button inactivity and no
audio play from a connected device.

Apply factory settings

You can reset this product to the default
settings programmed at the factory.
1
In AUDIO IN mode, on the remote
control press Volume -, BASS -, and
TREBLE - in sequence within three
seconds.
» When the factory settings restore is
complete, the product automatically
switches off and restarts.
EN
13