Listening To Usb Mass Storage Device/Mp3 Player; To Remove Usb Memory Device - Sharp HT-SB38 Operation Manual

Listening to USB mass storage device/MP3 player

Note:
This product is not compatible with MTP and AAC file
systems from USB mass storage device or MP3 player.
To play back USB/MP3 player
1
Select the USB function (on the sound bar or remote
control. "USB" appears on the display).
2
Playback will start automatically. Otherwise press / .
3
Select desired file to be played back by pressing the
or button.
Title, Artist and Album name are displayed if they are
recorded in the USB memory device.
Display content can be changed by pressing the
button.
Note:
To pause playback:
Press the / button.
Various USB functions
Function Remote control
Track up/
down
Fast
forward/
reverse
Note:
Fast forward/reverse is invalid when playing back a
variable bitrate file.

To remove USB memory device

1
Press the button to pause playback.
2
Unplug USB memory device from the USB terminal.
Notes:
SHARP will not be held liable for the loss of data while the
USB memory device is connected to the audio system.
Files compressed in MP3 and/or WMA format can be
played back when connected to the USB terminal.
This USB memory's format supports FAT 16 or FAT 32.
Operation
Press in the playback
or pause mode. If you
press the button in the
pause mode, press the
/ button to start the
desire track.
Press and hold down in
the playback mode.
Release the button to
resume playback.
E-19
SHARP cannot guarantee that all USB memory devices will
work on this audio system.
USB cable is not recommended for use in this audio system
to connect to USB memory device. Use of the USB cable
will affect the performance of this audio system.
This USB memory cannot be operated via USB hub.
The USB terminal in this unit is not intended for a PC
connection but is used for music streaming with a USB
memory device.
External HDD-storage cannot be played back via USB
terminal.
If the data inside the USB memory is large, it may take
longer time for the data to be read.
This product can play WMA and MP3 files. It will
automatically detect the file type being played. If unplayable
file is played on this product, the file will be automatically
skipped. This will take a few seconds.
This product relates to USB mass storage devices and
MP3 players. It may however face some irregularities due
to various unforeseen reasons from some devices. Should
this happen, turn off the unit and then turn it on again.
This unit only supports "MPEG-1 Audio Layer-3" format.
(Sampling Frequency is 32, 44.1, 48kHz)
Playback order for MP3 files may differ depending on the
writing software used during file download.
Bitrate which is supported by MP3 is 32~320 kbps, WMA
is 64~160 kbps.
For MP3/WMA files, please put ".MP3" ".WMA" extension.
Files cannot be played back if there is no MP3/WMA
extension.
Copyright protected WMA files cannot be played back.
Maximum total number supported for MP3/WMA files is
999. However, it is advisable to playback a media with a
small amount of MP3/WMA files to maximize playability.
■ Repeat play
Repeat play can play one track or all tracks.
To repeat one track:
Press the button repeatedly to select "REPEAT ONE".
To repeat all tracks:
Press the button repeatedly to select "REPEAT ALL".
To cancel repeat play:
Press the button to select "NORMAL" and " " disappears.
Caution:
After performing repeat play, be sure to press the / button.
Otherwise, the device will play continuously.
■ Random play
The tracks on the device can be played in random order
automatically.
To random play all tracks:
Press the button repeatedly to select "RANDOM".
To cancel random play:
Press the button to select "NORMAL".
Notes:
●
●