Table of Contents
Advertisement
USER CONTROLS
Options
Logo
Use this function to set the desired startup screen. If changes are made they will take effect the next time the
projector is powered on.
•
Default: The default startup screen.
•
User: Use stored picture from "Logo Capture" function.
Logo Capture
Press ► button to capture an image of the picture currently displayed on screen.
Note:
For successful logo capture, please ensure that the on-screen image does not exceed the projector's native
resolution.
"Logo Capture" is not available when 3D is enabled.
Before active this function, it is recommended that "Aspect Ratio" is set to the "Auto".
Auto Source
•
On: The projector will search for other signals if the current input signal is lost.
•
Off: The projector will only search current input connection.
Input
Press ► button to enable/disable input sources. The projector will not search for inputs that are not selected.
Auto Power Off (Min)
Sets the countdown timer interval. The countdown timer will start, when there is no signal being sent to the
projector. The projector will automatically power off when the countdown has finished (in minutes).
34 English
Advertisement
Table of Contents
